[lazyd]

hanger bracket????

Looking for the left hand hanger bracket and bearing for Johne deere H

Where would this bracket and bearing be located? Do you mean clear back on the wide spread ??? A picture would help. Also each part has the part number right on it. I should have about any part you need for an "H" I am just not clear on which part.-------------Bill

 

[nshaw]

Yes, back left hanger bracket. I don't know this site well but someone posted a picture with part numbers. it would be #26 in the sematic and the part number is 4369 SC. After looking at the spreader again I think the bracket is all I need at this point. Thanks Nowell

 

[lazyd]

Bracket

Yes, back left hanger bracket. I don't know this site well but someone posted a picture with part numbers. it would be #26 in the sematic and the part number is 4369 SC. After looking at the spreader again I think the bracket is all I need at this point. Thanks Nowell

You can go ahead and email me ----- willdoyle3314@yahoo.com ----It may be easier for you...???-----------Bill

 

[lazyd]

Hanger bracket for "H" spreader

Yes, back left hanger bracket. I don't know this site well but someone posted a picture with part numbers. it would be #26 in the sematic and the part number is 4369 SC. After looking at the spreader again I think the bracket is all I need at this point. Thanks Nowell

Nowell, Here is a picture of the 4369 SC hanger bracket I have for you. Let me know if you still need it. ---------Bill

 

[littledavie]

John Deere L model manure spreader

Looking for a support, feed control, part number AC 11534 C. Do you have one and what's the price?

 

[lazyd]

Support for an "L"

Looking for a support, feed control, part number AC 11534 C. Do you have one and what's the price?

Do you need just the support, no levers or linkage ? If so, it would be $50 plus shipping, depending on where you are. Please email me willdoyle3314@yahoo.com Thank You------------Bill

 

[billjonkey]

JD Model K Manure Spreader

Bill, I lost a part from my Model K and need to replace it. It is the entire bearing housing from the left side of the upper beater assembly. Part #'s are: 11H 139R (Spring collar), 3604 SC (Adjustable Collar), 3707 SC (Washer), 933 SC (Roller Bearing), JD 7759 (Straight Fitting), and 4375 SC (Bearing Housing). The bearing housing has a cast number of 375 SC. Guess it fell off in the field during use.

I live in Northern Nevada..could you give me a price including shipping.

Thanks so much, Bill (775.721.9178)

 

[lazyd]

Lost top beater brg. on a "K"

Bill, I lost a part from my Model K and need to replace it. It is the entire bearing housing from the left side of the upper beater assembly. Part #'s are: 11H 139R (Spring collar), 3604 SC (Adjustable Collar), 3707 SC (Washer), 933 SC (Roller Bearing), JD 7759 (Straight Fitting), and 4375 SC (Bearing Housing). The bearing housing has a cast number of 375 SC. Guess it fell off in the field during use.

I live in Northern Nevada..could you give me a price including shipping.

Thanks so much, Bill (775.721.9178)

Attached is a picture of the parts I have available. Brg. assembly-$25, adjusting collar-$5, washer-$1, cotter pin--no charge. Shipping- $7, TOTAL---$38
If you want these parts, just send a good check to : Bill Doyle, 22769 483rd Ave., Flandreau SD 57028
Or contact my email----willdoyle3314@yahoo.com

 

[panhd]

John Deere model h manure spreader parts

I have several (24) of the old ground drive manure spreaders all the way from working machines to parts machines. Most of them are John Deere but I also have others. Here is a list:
4---JD model H---1 working
2---JD model HH
7---JD model L
2---JD model K--- both working
3---JD model R
2---JD model E
1---IH model 200 (?) 4-wheeler
3---New Idea 1-- 4-wheeler 2 -- 2-wheelers
I sell mostly parts but will consider selling complete spreaders as well. E-mail with questions and prices------------------Bill

I have a John Deere model H with a broken feed cam. JD Part # 4356SC. Can anyone help me out?

 

[lazyd]

Feed Cam for an "H"

I have a John Deere model H with a broken feed cam. JD Part # 4356SC. Can anyone help me out?

I may have one extra. I will look tomorrow. email me willdoyle3314@yahoo.com I will send you a picture if I have one, with the price.---------Bill

 

[lazyd]

Feed Cam for model "H"

I may have one extra. I will look tomorrow. email me willdoyle3314@yahoo.com I will send you a picture if I have one, with the price.---------Bill

Here is a picture of the only feed cam I have available at this time. It is worn on the ends. It would work this way but probably should be rebuilt. I get $240 for a good one. I will sell this one for $100 plus shipping. Contact me on my email if you have any more questions.--------Bill

 

[lazyd]

Parts for your "N"

hi bill do you have the ratchet mechanism for the upper eccentric arm for the apron chain drive on model n series 1 spreader?

Do you still need parts for your Model "N" ? I bought 2 today. I will be parting them out. Contact me at willdoyle3314@yahoo.com Thanks------------Bill

 

[lazyd]

Parts for your model "N"

hi bill do you have the ratchet mechanism for the upper eccentric arm for the apron chain drive on model n series 1 spreader?

Do you still need parts for your Model "N" spreader ? I bought 2 of them yesterday and I will be parting them out. Please contact me at willdoyle3314@yahoo.com Thanks

 

[Jojn Baum]

Hello lazyd

I have a JD Model H spreader, and need the bearings and housings for the lower toothed spinning bar. The previous owner obviously never owned a grease gun and the bearing housings are worn beyond repair. Part numbers are Housing: 1285SC, and Bearing: 4364SC. Please advise if they're available and cost. One would get me by, but two sets would be great.

Regards,

John

 

[BigT]

Hello John, welcome to the tractor forum.

You can contact lazyd via email at: willdoyle3314@yahoo.com

 

[Jojn Baum]

Hello John, welcome to the tractor forum.

You can contact lazyd via email at: willdoyle3314@yahoo.com

thanks,

John

 

[LaneFFA]

I have several (24) of the old ground drive manure spreaders all the way from working machines to parts machines. Most of them are John Deere but I also have others. Here is a list:
4---JD model H---1 working
2---JD model HH
7---JD model L
2---JD model K--- both working
3---JD model R
2---JD model E
1---IH model 200 (?) 4-wheeler
3---New Idea 1-- 4-wheeler 2 -- 2-wheelers
I sell mostly parts but will consider selling complete spreaders as well. E-mail with questions and prices------------------Bill

I am looking for several parts for a John Deere R manure spreader I am restoring for my FFA project. Do you have any of these parts:
Wide spread drive chain and gear
Fender for main drive chain
Cover for Feed ratchet gear
Thanks - Lane

 

[BigT]

Hello Lane, welcome to the forum.

You can contact lazyd via email at: willdoyle3314@yahoo.com

 

[Jojn Baum]

LazyD (Bill) took good care of my needs. Quick service and a pleasant guy. A+ Rating.

 

[lazyd]

Thanks John ! I hope Your "H" is running smooth again !----------Bill