Tractor Forum banner

Ground Drive Manure Spreader Parts

1 reading
220K views 563 replies 172 participants last post by  lazyd  
#1 · (Edited)
UPDATE--UPDATE--UPDATE---1/4/2024

YES, I have Spreader Parts!!!

I have several (100+) of the old ground drive manure spreaders all the way from working machines to parts machines. Most of them are John Deere but I also have others. Here is a list:
18---JD model H
8--JD model HH
23---JD model L
12---JD model K --1 reconditioned
13---JD model R
3---JD model E
2---New Idea 10a & 14a
3---Moline
2---McCormick 200
1---McCormick 200H--Working condition
1---NI #17----Working condition
2---Case
2---IH #30
3---Moline
Inventory changes from time to time.--- I have NO parts for PTO driven spreaders.

This is an updated list 1-4-2025
I sell mostly parts but I do sell working spreaders as well. E-mail with questions and prices. Thanks-----Bill ----- willdoyle3314@yahoo.com
 

Attachments

#3 ·
chain covers for a "K"

I am sorry to say I do not have those. They are the hardest part to come up with. I think , when these spreaders were being used a lot , that whenever they had trouble with a chain, the shields would have to come off and they forgot about putting them back on. I need some myself. The K, HH, and the H are all the same sheilds. Thanks for checking though.--------------Bill
 
#4 ·
Bill,
Just wondering if you still have the H spreaders and or parts. I have an H that both chains busted and one of the flights wrapped around the back end of the spreader. Got any pics of the H's you could post? Since I'm here in Canton, I could drive out to Flandreau.
 
#5 ·
Apron chain for an "H" Spreader

So it sounds like you broke the apron chain on both sides, is that right ? Yes I know I can help you. I have 29 spreaders now and the apron chain in all the JD spreaders are the same. Other than some have #67 chain and others like the "L" and "R" usually have the #67H (heavy). Let me know what you need. A couple of links and a crossbar or a whole different chain. Thanks---------------Bill
 
#9 ·
Got a allis spreader here but I think it was painted orange and in fact its a N/I.
If I get a photo can you ID unit for me??
Thanks
 
#11 ·
Model L spreader parts

Like to know what you have for a model l spreader, looking to rebuild my old one.
I should have about anything you need for an L. Except for bottom beater bars. I am almost out of good ones. I believe you can still get new ones from JD but they are $92 each. I have several L's I am parting out. Let me know what you might need and I can price the parts for you. Thanks---------------Bill
 
#15 ·
JD model "R" widespread

Here is a picture of the wide spread I could take off for you. And I snapped a picture in the fog this morning of some of my L's and R's. This widespread will come as just the tube with flighting on it, no shaft or bearings. I am guessing you have those....??? Let me know what you think. ----------------Bill
 

Attachments

#17 ·
I should have all those parts for you. If I understand you right the number 33 you are talking about is the C 12766 C or 8168 C, It is a drive chain throwout lift shoe. Does that sound right ?? The hard part is getting them off. The pawl holder hub is usually rusted on so they won't come off. And the parts you need are under them. I'll need some time we are in the middle of a house remodel job and the boss (my wife) wants that done first. We'll be in touch.-----------------Bill
 
#18 ·
John Deere R spreader

That is correct, bearings and the C12766 is a drivetrain throwout lift shoe. I don't have the second page of the diagram but the JD dealer wrote the number down for me when I showed him the part I needed. I haven't taken it apart yet but I suspect I will have to heat everything to get it disassembled. I tried to cross the bearing numbers to see if someone other that JD could supply them, without success. JD is a little pricey.
 
#21 ·
Model L Problem

I don't know what to tell you. The last one I tried to get apart for a customer, I broke it ! I've tried soaking with penetrating oil, Heat, hammers, pullers, Cussing! Most of them are really rusted on. And then I have had a few that come right off. I wish I had an answer for you cause I have people waiting for me to get parts off for them and I can't. Maybe someone else will chime in here and help us out. Rust is always a challenge when working on old machinery. Good Luck----------Bill
 
#22 ·
Model L spreader

I have several (24) of the old ground drive manure spreaders all the way from working machines to parts machines. Most of them are John Deere but I also have others. Here is a list:
4---JD model H---1 working
2---JD model HH
7---JD model L
2---JD model K--- both working
3---JD model R
2---JD model E
1---IH model 200 (?) 4-wheeler
3---New Idea 1-- 4-wheeler 2 -- 2-wheelers
I sell mostly parts but will consider selling complete spreaders as well. E-mail with questions and prices------------------Bill
Hi,

I need your help. Please send me a price for part #C 12766C - Lift shoe and, part#3627SC - Collar.

Thanks

Clint
clintharwood@aol.com
 
#23 · (Edited)
John Deere Model L

Bill, Looking for Model L parts:

Eccentric Ring Pt # 7991C
Eccentric Upper Arm Pt# J18666C
Thurst Washer Pt# C12690C
Would be interested in complete Eccentric Assembly with both arms if price is right, Shipping to Edinboro, PA 16412

Thanks
Dennis

I have several (24) of the old ground drive manure spreaders all the way from working machines to parts machines. Most of them are John Deere but I also have others. Here is a list:
4---JD model H---1 working
2---JD model HH
7---JD model L
2---JD model K--- both working
3---JD model R
2---JD model E
1---IH model 200 (?) 4-wheeler
3---New Idea 1-- 4-wheeler 2 -- 2-wheelers
I sell mostly parts but will consider selling complete spreaders as well. E-mail with questions and prices------------------Bill
 
#24 ·
Model L parts

Hi,

I need your help. Please send me a price for part #C 12766C - Lift shoe and, part#3627SC - Collar.

Thanks

Clint
clintharwood@aol.com
Clint, The Lift shoe would be $100 + shipping ($281.04 new from JD) And the collar would be $15 + shipping ($41.64 new from JD) Let me know so I can try to get them off for you. Thanks-----------Bill
 
#26 ·
Model L parts

Bill, Looking for Model L parts:

Eccentric Ring Pt # 7991C
Eccentric Upper Arm Pt# J18666C
Thurst Washer Pt# C12690C
Would be interested in complete Eccentric Assembly with both arms if price is right, Shipping to Edinboro, PA 16412

Thanks
Dennis
Dennis, I should have these parts for you. The hard part is getting them off in one piece ! It seems anything on the axle is always rusted on. I'll see what I can do. ----------------Bill