[kelnbob]

gear for JD model H series 47

I have a John Deere Model H, Series 47 ground driven manure spreader and need a gear. Not sure what it is called but it runs the apron chain. It's egg-shaped and is inside the left rear wheel. I would like to maybe give you a call to discuss as I would maybe like to come up and take a look at your parts spreader so I am sure I am getting the right part. Would you mind providing a contact number? I am about an hour south of Sioux City. Thanks for your time. -Bob

 

[lazyd]

Feed Cam for model "H"

I have a John Deere Model H, Series 47 ground driven manure spreader and need a gear. Not sure what it is called but it runs the apron chain. It's egg-shaped and is inside the left rear wheel. I would like to maybe give you a call to discuss as I would maybe like to come up and take a look at your parts spreader so I am sure I am getting the right part. Would you mind providing a contact number? I am about an hour south of Sioux City. Thanks for your time. -Bob

Bob, I am removing the cut off shaft from a feed cam right now. This seems to be the only way I can get them off in one piece. Here is the Bad news.... It is the last one I have available right now. And it is sold. You can call me from time to time as I am buying selling and trading spreaders all the time. Attached is a picture of the last one I have, in the press. Is that the part you need ?? I do have one that is chipped on the edges. It will work and I will sell it cheaper.-----------Bill

 

[deeredr]

Parts

Hi
I am in need of a wheel for a John Deere H spreader. It is a 20" wheel and is spoked and has the hub in it, believe the part # might be JD558C. Ours is rusted out pretty bad.

Also am in need of part AC15967 for a John Deere 40 spreader.

Any help would be great

Thanks
Greg

 

[lazyd]

Hi
I am in need of a wheel for a John Deere H spreader. It is a 20" wheel and is spoked and has the hub in it, believe the part # might be JD558C. Ours is rusted out pretty bad.

Also am in need of part AC15967 for a John Deere 40 spreader.

Any help would be great

Thanks
Greg

Greg, Yes I have a good wheel for you. Most of them are rusted out. I am away from the shop for a few days but you can email me and I will send you a picture of what I have and a price. I have nothing for the 40, Sorry-------Bill ---- willdoyle3314@yahoo.com

 

[Nolemaker]

Model L spread won't go forward

Just curious, Did you ever figure out your spreader problem ??-----------Bill

I am looking to purchase a L spreader that hasn't been used for a long time. The person selling it said that it would not go forward. In your post you asked about the lever. Is that a possible cause for not going forward. I am asking what should I look for to ascertain the possible cause. Is this a common easy fix or potential a difficult one based upon the difficulty in finding the necessary part to fix it.

 

[Horsedrawn35]

Model E

I am looking for parts for a JD Model E Manure spreader.

A362SC These are castings inside the widespread on the back.

 

[lazyd]

parts for an "E"

I am looking for parts for a JD Model E Manure spreader.

A362SC These are castings inside the widespread on the back.

I should have those parts. I will check tomorrow. I hope they aren't covered with snow from today ! You can email me at --- willdoyle3314@yahoo.com

 

[lazyd]

Parts for an "E"

I am looking for parts for a JD Model E Manure spreader.

A362SC These are castings inside the widespread on the back.

Horsedrawn, I am not coming up with that number anywhere in my book. What I think you are talking about is 4264 SC and 4265 SC, there is a left and right, a cast piece in each end of the wide spread tube...??? Could you please send me a picture to my email ? or check the numbers again ??-----------Bill

 

[lazyd]

Maybe I figured it out...???

I am looking for parts for a JD Model E Manure spreader.

A362SC These are castings inside the widespread on the back.

By chance could that number be 4362 SC ??? If so, there is no left and right like I said. These are from, according to my books, a later "E" (?) or an "H", "K", "L", "M", "R"...??? email me at: willdoyle3314@yahoo.com and I will get you payment and shipping info--------------Bill

 

[Horsedrawn35]

Parts

4362SC is the correct number. Both parts, right and left are the same.

 

[johndeere6910]

john deere manure spreader

yes i a m looking for the star part on john deere h manure spreader that holes the beader finger bar on the manure spreader would u happen to have 1 that isnt cracked

 

[lazyd]

Parts for "H"

yes i a m looking for the star part on john deere h manure spreader that holes the beader finger bar on the manure spreader would u happen to have 1 that isnt cracked

Are you talking about the top or bottom beater ? Either way, I have one. email me at willdoyle3314@yahoo.com then I can send you a picture and a price with shipping. I will need your shipping address. Thanks--------Bill

 

[lazyd]

Beater Head

yes i a m looking for the star part on john deere h manure spreader that holes the beader finger bar on the manure spreader would u happen to have 1 that isnt cracked

Here are the 2 different styles of beater heads. Upper and lower. I have both available. Let me know if you need one. Thanks-----------Bill

 

[Circlehstables]

Lost hub end

Bill, I have a model L John Deere spreader. One of the hub ends that goes over the end of the axle fell off. Do you have any for sale? It slides over the axle after the wheel is installed and a pin holds it all together. Thanks!
Josh

 

[lazyd]

Wheel Adjusting collar

Bill, I have a model L John Deere spreader. One of the hub ends that goes over the end of the axle fell off. Do you have any for sale? It slides over the axle after the wheel is installed and a pin holds it all together. Thanks!
Josh

Yes Josh, I have those. Should be Part # 3627 SC. (you can check the other side, they are the same) Email me and we'll get you fixed up. willdoyle3314@yahoo.com-------------------Bill

 

[Dsikes]

John Deere 33

Do you still carry parts for spreaders?

 

[Dsikes]

Manure spreader parts

I have an old John Deere 33 manure spreader that I'm looking for parts for. I need the connecting rod & cap and a crank. Part #'s 12900 c, 12945c & 12945c. Or anyone that has a spreader itself. Help!

 

[lazyd]

Spreader parts

Do you still carry parts for spreaders?

Yes I do, but only for the old Ground Driven ones. Wish I could help. Bill

 

[pipeliner]

L model spreader sprocket

I am needing the gear that goes on the rear big beater. Part no. 8004c. If anyone could help me out where to find this I would appreciate it thanks

 

[nshaw]

Model H

I have several (24) of the old ground drive manure spreaders all the way from working machines to parts machines. Most of them are John Deere but I also have others. Here is a list:
4---JD model H---1 working
2---JD model HH
7---JD model L
2---JD model K--- both working
3---JD model R
2---JD model E
1---IH model 200 (?) 4-wheeler
3---New Idea 1-- 4-wheeler 2 -- 2-wheelers
I sell mostly parts but will consider selling complete spreaders as well. E-mail with questions and prices------------------Bill

Looking for the left hand hanger bracket and bearing for Johne deere H