Tractor Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
i am trying to remove my yanmar 2110D fuel pump. i have opened the inspection plate and removed the pin and bushing from the linkage but the pump will not come out of the block. it is banging on something. what am i missing here? any input would be appreciated. thx
 

·
Premium Member
Joined
·
1,813 Posts
There is a cut out in the block that will allow the rack pin to pass..
Tip the pump back and use a flashlight to find it.. or move the rack to the right to see if it’s there..
 

·
Registered
Joined
·
3,097 Posts
i am trying to remove my yanmar 2110D fuel pump. i have opened the inspection plate and removed the pin and bushing from the linkage but the pump will not come out of the block. it is banging on something. what am i missing here? any input would be appreciated. thx
Look on this site for the YM2210 Parts Manual in the Resource Manager section. The diagrams would help you out.
 
1 - 3 of 3 Posts
Top