Tractor Forum banner
1 - 3 of 3 Posts

·
Premium Member
Joined
·
1,504 Posts
Discussion Starter · #1 ·
Hi guys, I didn't know where to post this inorder to get the most eyes on it, I hope this is ok..
I'm trying to convert my pull start generator to an electric start [back surgery].
It has a Techum. HM100 engine. , My research shows a toothed flywheel from an HM80-100 will work, found on MOST key start snow blowers..
I found the starter for 45.00 on ebay but am having trouble finding a toothed flywheel at a reasonable price. I'm not concerned w/ the charging magnets because I'll probably start it from a jump box.. So any help would be appreciated as to a lead for a flywheel..
The P# I came up w/ is> 611091.
Thanks you.
 

·
Registered
Joined
·
7,311 Posts
Mr. John is the man with a plan on stuff like this. Hang in there he will be on here, and will most likely be able to steer you in the right direction. I dont know very much about Tecumseh myself but Mr. John, and other members are on here that do.
 
1 - 3 of 3 Posts
Top