Tractor Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Because all cat1 quick hitches are designed for cat 3 adapter bushings must be used. Ok bu the roll pin to be used with bushing is 7 1/16 my implement pin holes are smaller than 7 1/16 and can't drive the roll pins through. What do I try next?
 

·
Registered
Joined
·
71 Posts
I have used Cat 1 to Cat 2 bushings, then Cat 2 to Cat 3 bushings and welded the ends. Not saying this is the best solution, but it worked with what I had on hand.
 
1 - 3 of 3 Posts
Top