Tractor Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter #1
hey, thanks for all the help caseman-d, and Don Livingston.
Caseman your parts layout put us on the right track.:homereat:
Don noticed the extra shifting paw , top left.:confused:
This thing is internal except for the pin it rides on(upper top left. I think this is a load sensing device, if you get to much load on the pto, rather than breaking shafts, pto gears it loads that shift collar increases the spring travel, detente ball drops , spring loaded pin moves inward , uncoupling main shaft to the pto.
The pin should be out about 1 inch when things are right, disengaged 1/2 inch sticking out, and free wheeling pto.:tractorsm :ditto: :cheers: :night: :friends:
 

·
Premium Member
Joined
·
1,037 Posts
Mike,
Glad you got it going and didn't have to pull it out. Glad the photo came in handy for you. My scanner quit working so I just take a picture with my digital camera, sometimes it works and others aren't so good. Glad it's all mended for you.
caseman-d
 
1 - 3 of 3 Posts
Top