Tractor Forum banner
1 - 2 of 2 Posts

· Registered
1,150 Posts
For anyone else that has this problem without a seized engine, just won't run; you can run your hydraulics very slowly while cranking over the engine.
With the seized engine; could have possibly ran the pressure line to another hydraulic source or figured out a way to spin your pump without spinning the engine.
Could have also just shifted the valves to let the oil move while pulling with a come-along, had you not drained it. that should have let it hold up for a bit, maybe only just make chaining it up a hair easier.

at this point, might as well pull some cylinder pins.
1 - 2 of 2 Posts