Tractor Forum banner
1 - 2 of 2 Posts

· Registered User
1,034 Posts
Jacks, comealongs and chains.
If you are lucky enough to have some one available with a loader that will work also.
With the hydraulic controls activated lift or pull the loader up and curl the bucket back as needed, then chain it in place.
For some functions such as loader lift a block can be placed on the loader cylinder to hold it extended after it is moved.
Any cylinders that need to be extended to travel can use blocks or angle iron placed on the cylinder rods to hold in position.
Cylinders that must be retracted for traveling once retracted usually require chains to hold in that position.
1 - 2 of 2 Posts