Tractor Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
Hello all. Received an e-mail this morning about this place, so here I am. I have a DC and an 830 c-o-m, so those are the two I'm most interested in. Like to hear comments about them, and I don't mind a story or two either. I definitely have more questions than answers, so sooner or later I'll ask one. Now I'll see if this worked.
 

·
Tractor Lover
Joined
·
4,461 Posts
Welcome SHeiserman .....this is a friendly place where we all share a common interest...tractors.

I'm sure you'll enjoy it here.

:D
 

·
Registered
Joined
·
8,567 Posts
Originally posted by SHeiserman
Hello all. Received an e-mail this morning about this place, so here I am. I have a DC and an 830 c-o-m, so those are the two I'm most interested in. Like to hear comments about them, and I don't mind a story or two either. I definitely have more questions than answers, so sooner or later I'll ask one. Now I'll see if this worked.
Let me add my welcome as well! :friends: :cheers: You came to the right place for tractor info. :thumbsup:
 

·
EX Super Mod
Joined
·
5,317 Posts
Welcome SHeiserman:friends: Glad to have you aboard and very glad to see the Case board so active. So post some pictures when you get a chance would like to see them.
 

·
Premium Member
Joined
·
1,037 Posts
Welcome sheiserman,
I think you have a great choice of tractors. I have 2 D's, DC-3 that turns over and a stuck DC-4 with the heart shaped front end. I also have a case 800 with COM that I used to pull with, what a powerfull beast. Hope to here more from you. Sound like we have alot of Case experience on the board now so let the questions begin. We also enjoy any type of tractor story. We also like pictures.

<img src=http://img.photobucket.com/albums/v294/caseman-d/rare%20find/tom1.jpg>

caseman-d
 

·
Registered
Joined
·
14 Posts
Discussion Starter · #6 ·
Sounds like I need to learn the time honoredart of posting pictures. I'll see if I can figure it out. Caseman-d, like the picture. I tried pulling the 830, I didn't get very far very fast. Like everything else, there's more to it than just showing up. I was the only Case there too.
 

·
Premium Member
Joined
·
4,389 Posts
Welcome to the forum!
 

·
Registered
Joined
·
183 Posts
Here's a picture of my SC puller while it is on a dyno. This was at the tri-state show at Portland, IN.

Since the Pic was taken, the SC gained weight... fenders and tires, and I lost a bit.

Gwill

<img src=http://members.toast.net/gwill/album/Tractors/Case/SC_belted_up.jpg>
 
1 - 8 of 8 Posts
Top