Tractor Forum banner

1 - 20 of 37 Posts

·
Registered
Joined
·
142 Posts
Discussion Starter #1
A 2004 SEARS/CRAFTSMAN 25HP, 48" Mower, Electric Start, 6 Speed Trans-axle,Rear Wheel Weights, Front Weight, Electric Lift Sleeve Kit,with Red, White and Blue Pin-stripe down and along the sides and across the back, Chrome on the back below the seat, Chrome on each side of hood, Chrome on both sides of fenders/running boards,Chrome on top and bottom of the Dash, Chrome molding around the seat,Chrome on each side of the front weight brace, and to top it all off a nice new set of Chrome "BABY MOON" Hubcaps.
The trailer is a Sears/Craftsman 1250 pound capacity, 16 cu. ft steel dump trailer, also with 2'x31" Chrome stripes across the front and back , and the RED, WHITE, and BLUE Pin-stripes , down both sides and across the front and back,and to top the trailer of a set of Chrome "BABY MOON" Hubcaps.
Also have the attachments listed below and hope to add more sometime down the road.A 900 pound steel roller, Spike Aerator, Plow, Rear Grader Blade, Disk Harrow ( eleven inches), Box Scraper with Leveling Blade,I have put the RED, WHITE and BLUE Pin-stripes on the attachments to match the tractor. No chrome on them yet but give me time and maybe momma will say yes to more C H R O M E.
THANKS ! SAM and JEANNIE
LAKEVIEW, OREGON
 

Attachments

·
Registered
Joined
·
4,173 Posts
wow Sam.. Thats a lot of chrome... Looks great.. Love the hubs on the trailer too...

Why the front weights??
 

·
EX Super Mod
Joined
·
5,317 Posts
Looks good Sam i should have my chrome hub caps soon i hope:thumbsup:
 

·
Registered
Joined
·
142 Posts
Discussion Starter #9
Where did I get the Moom Caps

I got the set of caps for the tractor 8" and the set for the trailer 8" from the address and comp below. I think it is OK to give out the name and address on the Forum, if not someone please let me know.
Both sets were the same price (each) and they do carry other sizes.They have wheel size 4" 6" 8" 10" 12" and three or four different sizes .....(SIMPLICITY MFG, INC)
TENNIES PARTS & SERVICE CENTER
SEPW PARTS DEPT.
112 S. 5th AVE
WEST BENT, WI. 53095
# 262-338-2316
If you call, ask for SCOTT. He seems like a great guy and will go out of his way to try and help. The price was $27.98.
.......................................................................................................
.......................................................................................................
For the ones who asked about the weight up front.Well first the manual say's with heave /big loads it is a goo idea to have the weight up front. I know for a fact that with the PLOW/SCRAPER/GRADER BLADE it really does help in the ride and how the tractor will handle over rough ground and it will help over all to have control. I have also added fifty (50) pounds to the attachments and I do not like to lift the front up.Last the wife (JEANNIE ) said tell them that away I wont scrape the CHROME, and just last week I PLOWED GRADED and ROLLED over 1 1/2 lots.
Thank you for all the nice words. I like to tinker but still like to have something I can work with and also show off and have fun. Ya'll know what they say about boy's and toy's
 

·
Registered
Joined
·
142 Posts
Discussion Starter #11
where I got the moons

Sorry it must be the weather , here is the phone number and e-mail on where to get the CHROME HUBCAPS.
e-mail>>> [email protected]
phone>>> 1-800-236-2333
Fax>>>> 1-262-334-3269
 

·
Registered
Joined
·
2,687 Posts
Finally!! Someone else with the front weight mounting bracket. I really got beat up at that "other" place when I posted how well it stabilizes the tractor.
 

·
Premium Member
Joined
·
1,364 Posts
Originally posted by Argee
WoW.....Simple John has some serious competition:furious: :lmao:
Looks great!

SJ, better get busy and add some more chrome. I think Sam may have just bested you in the shiney tractor competition. You still hold top honors in the Simplicity category though.:winky:

Mark
 

·
Registered
Joined
·
664 Posts
Wow!
Looks like your GT got grabbed by MTV's 'Pimp My Ride'. I can't ever remember seeing a GT with that much chrome.
 

·
EX Super Mod
Joined
·
5,317 Posts
Originally posted by simple_john
How can i compete with Sam & Jody???? They are both using simplicity parts!!!!:furious: :furious:
Well can we help it if simplicity has the parts and at a good price. If only mine would come in:mad: I guess everybody bought up there stock and now i have to wait till they get more:mad:
 

·
EX Super Mod
Joined
·
5,317 Posts
My hub caps came in today the guy called and told me they were in and hes shipping them to me tomorrow:partydanc
 

·
Premium Member
Joined
·
396 Posts
Pimpin'

Now, all you need are some new rims like this guy...
<img src=http://www.bakermedia.com/gallery/data/523/5551lawn1.jpg>
 
1 - 20 of 37 Posts
Top