Minneapolis moline hydraulic hose

512 Views 4 Replies 2 Participants Last post by MinneapolisMoline-Newbie, 12 mo ago

MinneapolisMoline-Newbie

This is a 1 inch 90 degree elbow hydraulic hose off my 69 Minneapolis moline jet star 3 and I can’t seem to find one anywhere. Anybody have an idea of where I could find a replacement?

See less See more

Save

1 - 5 of 5 Posts

LouNY

· #2 · 12 mo ago

Looking at the picture it looks to be a rubber hose, is it?
If so coolant or hydraulic fluid?
Coolant there are many silicone elbow available,
petroleum not so many.
1" Inch ID 90° Degree Diesel Gas Fuel Filler Hose Elbow 28" Long

not for fuel or oil,
90 Degree Silicone Hose 25mm 1" 1 inch Racing Elbow Coupler Pipe Black | eBay

Save

MinneapolisMoline-Newbie

Discussion Starter · #3 · 12 mo ago

LouNY said:
Looking at the picture it looks to be a rubber hose, is it?
If so coolant or hydraulic fluid?
Coolant there are many silicone elbow available,
petroleum not so many.
1" Inch ID 90° Degree Diesel Gas Fuel Filler Hose Elbow 28" Long

not for fuel or oil,
90 Degree Silicone Hose 25mm 1" 1 inch Racing Elbow Coupler Pipe Black | eBay

It is a hydraulic hose

Save

LouNY

· #4 · 12 mo ago

It's a low pressure or suction hose isn't it?
Just hose clamped on.
The fill tube above should work.
Just have to shorten it quite a bit.

Save

MinneapolisMoline-Newbie

Discussion Starter · #5 · 12 mo ago

LouNY said:
It's a low pressure or suction hose isn't it?
Just hose clamped on.
The fill tube above should work.
Just have to shorten it quite a bit.

Yes I think that hose will work but it is currently out of stock do you have any other suggestions?

Save

1 - 5 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month