Tractor Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
hi everybody and thank you for accepting me as your new friend.

im here to help and also always appreciate help.

im a farmer and also mechanic by trade. i rebuild tractors as a hobby and part time income

i would like to offer my professional knowledge to help others.

i have workshop or repair manuals and parts lists to share.( this is not illegal as im sharing p2p)

also im looking for the following manuals that someone is willing to share with me.

Fiat 1880
Deutzfahr DX 90
ford 6000
ford 4500
ford 6600
Deutz dx 3.70
John Deere 8430
Case 580G - 1986
Cat 424D TLB, Ser.nr. - RXA1986
DAF CF85-430 2006
ford 1900
JCB 3CX 2010
Fiat 640
Mercedes benz 2624 6x6
JCB 3CX 4 x 4 site master 88 model
challenger spra coupe 7660

i d appreciate your help and if you are looking for a workshop manual please feel free to leave a PM

thanks a million.

john south africa
 

Attachments

·
Registered
Joined
·
10 Posts
I have Mahindra 5010 HST and gear drive Service Manuals. Just learned by digging into them that I need the "Engine" manual for detailed help with a cranking problem.

My 5010 Gear Drive wont start from key and cranks but wont start if I jump from solenoid. I've got enough manual info to work on electrical issues and will check fuel filters, etc when it warms up later this week.
 

·
Registered
Joined
·
3,044 Posts
One the 6th tab across the top of this forum is MANUALS. You can search to find one and download it or you can upload one should you have scanned it in PDF. :)

I once had a John Deere 261 finish mower. the manual was very bad, so, I made my own for the pulleys and belt. plenty of people have benefited from it.
 
  • Like
Reactions: Bobby Dunn

·
Registered
Joined
·
31 Posts
hi everybody and thank you for accepting me as your new friend.

im here to help and also always appreciate help.

im a farmer and also mechanic by trade. i rebuild tractors as a hobby and part time income

i would like to offer my professional knowledge to help others.

i have workshop or repair manuals and parts lists to share.( this is not illegal as im sharing p2p)

also im looking for the following manuals that someone is willing to share with me.

Fiat 1880
Deutzfahr DX 90
ford 6000
ford 4500
ford 6600
Deutz dx 3.70
John Deere 8430
Case 580G - 1986
Cat 424D TLB, Ser.nr. - RXA1986
DAF CF85-430 2006
ford 1900
JCB 3CX 2010
Fiat 640
Mercedes benz 2624 6x6
JCB 3CX 4 x 4 site master 88 model
challenger spra coupe 7660

i d appreciate your help and if you are looking for a workshop manual please feel free to leave a PM

thanks a million.

john south africa
Hi johnflei I was just wondering if you would have a workshop manual for a deutz fahr dx 6.05 as I have recently purchased one and need to rewire it and would like the wiring schematics of it.
Thanks
Eoin ireland
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top