Tractor Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
not sure what's similar in model but my 480 3point is pulsing? under load. I only notice it anyways under load, so far I've changed the fluid and filter, using spec fluid. still no change, the hotter it gets the worse it gets and with heavy implements it will shake a man to death. also any info on a 480 out there? internet don't show much if anything on that model, any help would be greatly appreciated, thank you
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #4 ·
thank you very much! lots of helpful info in there. not the same model but everything is made similar or the same and should help put me in the right direction. love the old tractor but finding anything for the 480 is far and few in between.
This may give some idea of what to look for. Down in the page 150 area.
https://www.tractorforum.com/manuals/long-tractor-service-manual-for-360-460-510-series.19
This may give some idea of what to look for. Down in the page 150 area.
https://www.tractorforum.com/manuals/long-tractor-service-manual-for-360-460-510-series.19/
 
1 - 4 of 4 Posts
Top