Tractor Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
129 Posts
Discussion Starter #1
Short question, I have recieved my new headligts to mount today. Are the headlights supposed to be able to come on with he engine off? I pulled the kill switch and have no current at the headlights. The rig is original with 6v pos ground.
 

·
Premium Member
Joined
·
139 Posts
Short answer - yes!

The lights should work with the switch off. I believe the wire should run from the "L" terminal on the regulator to the switch, then to the lights.
 

·
Registered
Joined
·
129 Posts
Discussion Starter #3
Thanks bigdog, had a good feeling I could count on you. i have the manual, but it shows a 5 pos switch, mine is only three. ...ODB. kind. The rest looks same. Cleaned the commutator on the generator and tested it with a batt charger, it spins...not fast but no dead spots, so fresh paint and re-assemble today. Hope it quits raining!
 
1 - 3 of 3 Posts
Top