Tractor Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
Am trying to switch from a marvel carb to a zenith carb on ford jubilee/NAA , but the zenith does not have the same little knobs as the marvel carb has to lock linkage in place. not sure what these knobs are named ,and they do not dis-assemble from marvel carb.
High lighted yellow in attached pic.
Please advise.
 

Attachments

·
Registered
Joined
·
3,211 Posts
Hello trub,

The Zenith should have the linkage balls same as the Marvel. Sounds to me like you got the wrong carburetor. Check with whoever sold it to you.
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #5 ·
trub,

Can you make one of these work? The outfit that sold you the Zenith should be well aware of these linkage balls, and I would expect them to supply same free of charge.

View attachment 37434
Thank u Big T,for the info, i bought carb used on ebay, my mistake for not checking out better. It looks like these linkage balls are what i will need.
I believe this will solve the problem.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top