Tractor Forum banner

International 1066 3 point lift problem

2K views 0 replies 1 participant last post by  Wolff123 
#1 ·
I have a 1066 and the three-point lift has stopped functioning. I hooked up my rake to test the two remotes which are still functioning correctly. I need to check that the control arms are in the correct position with the top one being behind the bottom one. But when removing the inspection cover on the back and running the tractor, I notice that there is hydraulic fluid raining down from above. I am thinking that this is not normal but would like a second opinion before I do anything.

I was using a 10ft bush hog when this problem first occurred. Seemed to be that the problem only occurred once I took the mower off and then the lift wouldn't work after
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top