Tractor Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hi all, I have an IH 574, diesel. Pretty basic question but this is my first tractor. How much hydraulic fluid goes in the back? I can see some gears and such when I open the fill location, should these be completely submerged? I usually fill until the dipstick reads full, but just checking. I have never drained the system and replaced it. I have a couple small leaks from the loader and power steering so I end up having to refill it every now and then.

Also, it does make a whining noise sometimes - is that a filter problem usually?

Thanks

Zach
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #4 ·
Thanks for the replies guy ill take a look at that literature when I can. I really have no idea how much fluid is in it, as I have never drained it. As you can see from these photos this is the rear hydraulic fill in as you can see from the close-up there’s no fluid in the reservoir in the back there and like I said the dipstick says it’s full. my question is does this area need to be filled with fluid it looks like there’s gears there that are a part of the three point hitch. Please correct me if I’m wrong and if the dipsticks says it is full it is full. Thanks in advance
Automotive tire Sanitary sewer Plumbing Automotive wheel system Gas

Motor vehicle Vehicle Wood Gas Automotive exterior
 
1 - 3 of 3 Posts
Top