Tractor Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
HELLO I AM TRYING TO SPLIT REAR FRAME TO CHANGE A GEAR IN THE RANGE TRANSMISSION.iT SEPERATES 1/4 INCH THEN COMES TO A STOP. IT SEEMS LIKE I AM MISSING SOMETHING AND THE MANUAL I HAVE IS VERY VAUGE. I HAVE STANDS KEEPING EVERYTHING STRAIGHT AS POSSIBLE. ANY INFO WOULD BE APPRECIATED THANKS
 

·
Premium Member
Joined
·
3,114 Posts
Howdy onerodeguy, welcome to the tractor forum.

Look for locator pins. If you have any, they can be a problem separating flanges.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #3
Thanks for the reply sixbales. there is one pin I can see on the flange, it does slide open about 1/4 in on that pin easy seems like something in one of the transmissions is holding something up( snap ring or pin or bearing ) I am waiting for another service manual that's not missing pages like the one I have maybe that will help also
 
1 - 4 of 4 Posts
Top