Tractor Forum banner

1 - 5 of 5 Posts

·
Registered User
Joined
·
790 Posts
If you have a hydraulic shop near by they might be able to fix you up. They might be able to make a hose with those ends or even patch that pipe with silver solder. Good luck
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 · (Edited)
If you have a hydraulic shop near by they might be able to fix you up. They might be able to make a hose with those ends or even patch that pipe with silver solder. Good luck
Thank you. I tried Industrial Connections in Mantua. They tried a couple times. They made the ends OK, albeit they could not fabricate a hose with that configuration to fit around other engine parts. I dunno, you have sparked me to try others.

MeThinks it has to be a metal hose that can be bent via machine to that configuration.

I did try several welding companies all who declined becasue it had been welded twice before.

Thankyou, again for your thoughtful reply.
 
1 - 5 of 5 Posts
Top