Tractor Forum banner

1 - 13 of 13 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
What a great site to have come across!! I have a HT 20 and would greatly appreciate it if someone has any info on how to set up a 3 point hitch on this tractor and convert the pto to a 540.
p.s. Does anyone know what the speed is of the pto?
Thanks, Borys.
 

·
Registered
Joined
·
2,687 Posts
Hi Borys

I'm not sure about the HT20 but on the earlier large frames they had an optional rear mounted 540 rpm pto.

If you look in the 1968 specs catalog a few pages down here, there is a pic of a 3pt on a 1250.

aegt5000 will probably have the info you need. I'm more of a tubeframe groupie!:D
 

·
Registered
Joined
·
1,569 Posts
Hello Borys…

Welcome to the forum
It great to have another Large Frame owner here.

There were 2 rear PTO attachments available for your HT-20
Model # 18082 was a 2000 RPM kit
Model # 18094 was a 540 RPM kit.
Sorry, but I don’t have any installation manuals or parts lists
on either of these PTO model numbers.

The 3 point hitch for your HT-20 is model # 18086.
(very different than the 18010 hitch)
I did not post any info on the 18086 hitch because the only
pages that I have were downloaded at such poor quality they
are barely legible. But they are infinitely better than nothing.

So here is what I have:

3 Point Hitch Model 18086 Page 1 of 3
 

Attachments

·
Registered
Joined
·
4 Posts
Discussion Starter #7
Thank-you all

Thanks for the qiuck replies! I tried logging in and couldnt so i registered as a new user and got in. Contacted the board hopfully they will sort it out!
I can now see why I couldnt figure it out. I have only the 2 arms "F" and missing the rest. The parts list is greatly appreciated. I am going to try to manufacture the rest if I can figure them out from the drawings. If anyone one has any pis of the other pieces it sure would help!
Do you think it is possible to make the 540 pto kit?
 

·
Registered
Joined
·
1,569 Posts
In addition to the parts needed to make your own hitch,
Johnny Products also sells complete 3 point hitches for
all of the Bolens Large frame tractors.
 

·
Registered
Joined
·
4 Posts
I started this thread on one of the "other" Bolens forums: Large Frame 18086 3pt Hitch Dimesions needed for CAD model - MyTractorForum.com - The Friendliest Tractor Forum and Best Place for Tractor Information I only have the top link mount, load lock, and link to the center lift yet to make. I will post the pictures of progress to date once I get them resized. If you want them full-size send me an email too [email protected].

GTalk has a parts manual for the 2000 rpm rear PTO in there manual archives.

- Dave
 
1 - 13 of 13 Posts
Top