The Bolens info I have states the recommended oil for the
Eaton 11 Hydro is Benzoil THL 19 it also lists alternate oils
Mobil 423, Texaco TDH, JD303 or Amoco 1000.
After quite a bit of web surfing, I can’t find a source for any
of these listed oils. I even went on Mobil’s, Texaco and Amoco’s
web sites to see if they offered replacements for these products,
but I can’t even find them on their mfg’s sites !!!
I did some searching on other Bolens forums and the recommendations
are scary “Use F”, Use A”, Use Dextron II”, Use Dextrol III”, “Use AFT +”
“Use ATF+3”, “Use ATF+4”, “Use SAE 20” , “Use Mobil 1”
If these guys are to believed “Chocolate Milk” will work in a pinch.
Any suggestions where I might start looking to find some REAL info that
would link a currently available hydro fluid back to one of these, or if
possible a source for one of the originally listed fluids.
Eaton 11 Hydro is Benzoil THL 19 it also lists alternate oils
Mobil 423, Texaco TDH, JD303 or Amoco 1000.
After quite a bit of web surfing, I can’t find a source for any
of these listed oils. I even went on Mobil’s, Texaco and Amoco’s
web sites to see if they offered replacements for these products,
but I can’t even find them on their mfg’s sites !!!
I did some searching on other Bolens forums and the recommendations
are scary “Use F”, Use A”, Use Dextron II”, Use Dextrol III”, “Use AFT +”
“Use ATF+3”, “Use ATF+4”, “Use SAE 20” , “Use Mobil 1”
If these guys are to believed “Chocolate Milk” will work in a pinch.
Any suggestions where I might start looking to find some REAL info that
would link a currently available hydro fluid back to one of these, or if
possible a source for one of the originally listed fluids.
