Tractor Forum banner

hanging brake pedal on Ford 250c

1K views 2 replies 2 participants last post by  buddyjc65 
#1 ·
My inside brake hangs up on release. It doesn't release all the way from the geared cam under the floor board that holds it in place when engaged.
I can lie on the ground and pry it over to release but this is a 2 person job as someone needs to press down on the pedal while I'm on the ground.
Any suggestion would be appreciated.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top