Tractor Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hello,
I am a new member and new at trying to repair antique tractors. I am not new at auto mechanics however. I bought a running, though sorry looking, 58 JI Case 420B construction with backhoe and front end loader. My biggest frustration, no brakes at all. I have no adjustment to the linkage, the grease zirts were removed for the brake pedal assembly so one side was seized up.

My biggest issue is I can't get access to the brake disc covers due to the foot plates and a large diagonal rod that seems to be a part of the backhoe assembly. I have an operator's manual but not a service manual for this.

To make matters worse, it appears every bolt and nut on this thing is rusted tight.

Any idea how to eat this elephant?

Thanks,
Tony
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #5 ·
do me a favor and snap a photo or two of the brake drum housings if you can, these things are famous for their poor braking systems, many times just tearing them apart, cleaning lubing are reassemble will do the trick, I just went through this with a 430CK, and now on my 580CK
My biggest problem is getting down to the brake covers since this is a Construction backhoe / front loader. I have foot platforms, backhoe support rods, seat assembly, etc all seemingly in the way to be actually getting to the brake covers.
I will try and get some pictures of what appears to be the obstructions.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top