[thammes]

My 446 Ingersol tractor with 48in. blower attachment. When I engage the attachment drive lever the auger stops turning because the PTO Clutch needs to be adjusted. Could someone please let me know how to adjust or fix the problem?

 

[Argee]

Welcome to TF.com thammes.

I'm not sure I understand the problem??? You state that when you engage the drive lever the auger stops turning...Why was it turning in the first place with the lever disengaged?

Have you looked at the clutch in an engaged and disengaged position?? Maybe it's a linkage adjustment.

 

[Ingersoll444]

WELCOME THAMMES!!

I am assuming you mean the blower works when engaged, but when you try to blow snow, it slips, and the auger stops. Is that right?

That cluch is easy to adjust, I know there has been manuals posted else were on the web. If I cant find it, I will scan and post mine. We will get you fixed up

 

[case644]

Welcome Thammes,

Is it the easy adjust or standrard clutch. Anyway here are the digrams for both. Also if you go to http://groups.yahoo.com/group/casegardentractors/
and go to the fiiles section there is a pdf called pto clutch adjustment and repair.

Hope this helps.

 

[case644]

Welcom Thammes,

If you go to: http://groups.yahoo.com/group/casegardentractors/

there is a copy of the clutch adjustment and reapir manual under the files section.

Hope this helps,

Bob

 

[Ingersoll444]

Thats where I saw it.

Your tractor would be the EZ adjust BTW