[ScottyD13]

Bought the skid steer had to repower I’d did run and move just fine then it had a fire and burned up the new engine and the hydraulic hoses. Put another new engine in it. Now the LH side when the stick is pushed forward is goes in reverse. Before you say it yes I swapped the hoses to make sure I had the correct. Still the same issue. I have spent so much on this thing. Just need it to work. Any help would be great!

 

[EdF]

Howdy Scotty, welcome to the forum.

I found the following comment regarding an 1816B addressing a different control problem:

"On ours, when the pump was centered the control handle was not. We had to adjust the linkage. It is covered in the service manual."

I'm thinking that your control handle is out of adjustment??? Operating on one side of pump center??

 

[ScottyD13]

I’ll check that today thank you