Tractor Forum banner
1 - 20 of 68 Posts

·
Registered
Craftsman's 855C, 856C, 857C
Joined
·
330 Posts
Discussion Starter · #1 ·
Well I put yet another craftsman in my shed thanks to a member of MyTractorForum, along with a spare engine too! I bought this from him and now I got both the 6 and 10 horsepower version! It needs A LOT, mostly everything BUT i will get it there.

It all started with me seeing this tractor somewhere on the forum but I forgot where and remembering the fella having it, then meeting the fella at a local tractor show and expressing interest in it saying "if you ever wanna sell it let me know". Then it turns out my first craftsman or the one in the 3rd picture on the left is having problems and asking the fella for some pictures of now my tractor on the right in the 1st and 2nd picture. He then sent me a message saying he was thinking of selling the tractor and asking if I was still interested in it, needless to say I asked if I can come look at it and then went to his house to look at it and then struck a deal.

When I bought the tractor the fella I bought it from said he bought it from a kid to restore it, but was never gonna get around to it so he offered it to me before he put it for sale on Facebook Marketplace. The kid was gonna scrap it when the fella bought it! I am now the 3rd owner as far as I know, unfortunately no manuals or paperwork came with the tractor when I bought it though.

My personal plan is to document the restoration here when I can and have time, and ask as many questions as possible if I or my stepdad don't know the answer to them. I am going to take as many pictures as possible when the resto gets started and throughout the resto and upload them here as well if my phone allows me to. I also am going to "bag and tag" and label every nut and bolt possible when I take it apart, (because I made that BIG mistake on my other tractor).

Look for more on this tractor coming back from the dead in the hopeful near future....


Below are the pictures the fella sent me when he started talking about selling it.....
Tire Wheel Automotive tire Vehicle Tread
Tire Wheel Automotive tire Vehicle Tread



It is now in my shed with my other Craftsman, now I have both the 6 and 10hp versions!
Wheel Tire Automotive tire Vehicle Motor vehicle
Vehicle Wheel Tractor Automotive tire Motor vehicle
 

·
Registered
Craftsman's 855C, 856C, 857C
Joined
·
330 Posts
Discussion Starter · #2 ·
Hi everyone, I hope everyone had a nice Christmas and New Year. I have a restoration update, here it is-

I took the gas tank off......
Wood Gas Machine Automotive exterior Engineering



and found a nice nest......
Gas Grass Soil Metal Event
Hand Finger Amber Circle Cuisine
Motor vehicle Wood Automotive lighting Bumper Gas


I cleaned all the rust out of it, I completely cleaned it out twice with rocks CLR and PB blaster.....
Wood Door Gas Household hardware Circle



Results after cleaning one.....
Automotive tire Water Eyelash Tints and shades Rim



Results after cleaning two and letting the CLR sit for 36 hours.....
Iris Circle Close-up Darkness Metal
 

·
Registered
Craftsman's 855C, 856C, 857C
Joined
·
330 Posts
Discussion Starter · #3 ·
I also put some PB blaster in the spark plug hole to try and free up the engine since it won't turn over by hand, I put the PB in everyday for 2 weeks but at the end of the 2nd week of the engine still not turning and the PB evaporating I put some ATF and kerosene in the spark plug hole. That too evaporated and didn't work either by the next morning so I am gonna have to most likely rebuild the engine. I took the engine head bolts out when I put the ATF in the hole just for this reason of having to take the engine apart so I can try and save some time.

Before with the ATF in the spark plug hole......
Gas Musical instrument Musical instrument accessory Wood Audio equipment
Fluid Circle Fashion accessory Metal Macro photography


After with the ATF not in the spark plug hole......
Gas Audio equipment Metal Machine Circle
 

·
Registered
Craftsman's 855C, 856C, 857C
Joined
·
330 Posts
Discussion Starter · #4 ·
Well folks, I'm back with a bit of updates. I took the shroud and starter generator cover off and the flywheel screen off too and found a nice big nest, I vacuumed out the nest since the pictures.....

Automotive tire Ash Dish Cuisine Ingredient
Automotive tire Alloy wheel Wheel Rim Motor vehicle


I also took the air filter off, and it looks like it's the original one! I right now plan on blowing it out with the air compressor gun and seeing how it looks. It will most likely have to be replaced, so I am planning on getting an NOS one for the engine and saving the original to be on the safe side but we will see......
Table Wood Automotive tire Hardwood Flooring
Headgear Ball Artifact Circle Flooring
 

·
Registered
Craftsman's 855C, 856C, 857C
Joined
·
330 Posts
Discussion Starter · #6 ·
I also took the head off the engine, here is what it looks like when I first took it off along with what the oil looks like when I pulled the dipstick after I noticed there was no more transmission fluid in the spark plug hole . As you can see there is carbon on the head.....
Road surface Asphalt Space Electric blue Tar
Automotive tire Snake Jaw Bumper Motor vehicle
Land vehicle Motor vehicle Automotive tire Automotive fuel system Automotive design
 

·
Registered
Craftsman's 855C, 856C, 857C
Joined
·
330 Posts
Discussion Starter · #9 ·
V60 Tecumseh? Piston Rings STD..... Stens # 500-355, Tecumseh #34854

STD Piston... Tecumseh # 34531
It is actually an HH60 Tecumseh. Thank you for the part numbers Bob, would you happen to have the numbers for the HH60? I'm at least gonna need rings, and gaskets for now and would like to get NOS of these if possible
 

·
Registered
Joined
·
2,390 Posts
It is actually an HH60 Tecumseh. Thank you for the part numbers Bob, would you happen to have the numbers for the HH60? I'm at least gonna need rings, and gaskets for now and would like to get NOS of these if possible
The V60 & HH60 are both 2 5/8" (2.63in - 66.7mm) bores.... So they both use the same ring #'s. Piston maybe slightly different.... STD piston for HH60 is listed as Tecumseh #
33312B

The first thing I would check on that HH60, before I did anything, is to see if it has the Tecumseh SS ignition. You didn't give a year and they built the HH60 with both SSI and Points. Does it have a regular automotive style coil, or does the sparkplug lead come out from underneath the flywheel? The reason I ask is that those later year HH60's SS ignitions are almost impossible to find replacement parts. You need to understand, before you drop the time/$$$ into rebuilding that engine, that you're going to be depending on a 50 year old electronic ignition system to continue to perform and when (not if) it pukes, you can't get the parts any more. There are "upgrades" available at about $150 and any original OEM you see on E-bay is just as old as what you already have on the machine, so you're rolling the dice as to IF it actually still works and how long it's going to last


Pull the flywheel and if it looks like this underneath it, it's SSI
Bicycle part Rim Automotive wheel system Bicycle drivetrain part Auto part
 

·
Registered
Craftsman's 855C, 856C, 857C
Joined
·
330 Posts
Discussion Starter · #11 ·
The V60 & HH60 are both 2 5/8" (2.63in - 66.7mm) bores.... So they both use the same ring #'s. Piston maybe slightly different.... STD piston for HH60 is listed as Tecumseh #
33312B

The first thing I would check on that HH60, before I did anything, is to see if it has the Tecumseh SS ignition. You didn't give a year and they built the HH60 with both SSI and Points. Does it have a regular automotive style coil, or does the sparkplug lead come out from underneath the flywheel? The reason I ask is that those later year HH60's SS ignitions are almost impossible to find replacement parts. You need to understand, before you drop the time/$$$ into rebuilding that engine, that you're going to be depending on a 50 year old electronic ignition system to continue to perform and when (not if) it pukes, you can't get the parts any more. There are "upgrades" available at about $150 and any original OEM you see on E-bay is just as old as what you already have on the machine, so you're rolling the dice as to IF it actually still works and how long it's going to last


Pull the flywheel and if it looks like this underneath it, it's SSI
View attachment 76470
Thank you for the information Bob, I appreciate it. I believe the tractor is the same year as my other ones, 1967. I have not taken the flywheel off as of yet, but on the shroud there is a small sticker that says Super Start if this helps you determine what engine it is. When I take the flywheel off I will let you know what I find out.
 

·
Registered
Craftsman's 855C, 856C, 857C
Joined
·
330 Posts
Discussion Starter · #12 ·
Hi everybody,

I'm back with some updates on the tractor. I cleaned up the head, the top of the piston, and the valves the best I could with a brass brush. Here are some pictures, the first picture is when I was cleaning the head. I sprayed some PB blaster on it and used the brush on it......
Helmet Wood Bag Bumper Automotive lighting


All cleaned up now, is the condition of the head "normal" so to speak in the first picture with those tiny looking crack things?.......
Automotive tire Helmet Gas Rim Automotive wheel system
Plumbing fixture Household hardware Gas Composite material Auto part


Here is a picture of the rest of the engine, this is the best I can get it clean unless someone has a tip to make it cleaner than this any help is appreciated. I am thinking of maybe replacing the piston head right now anyway, but there again why fix somethin' that ain't broke and replace something when it doesn't need it so i'm not sure yet. The piston wall is pretty smooth with minor small scratches......
Automotive tire Automotive engine gasket Motor vehicle Wood Gas
 

·
Registered
Craftsman's 855C, 856C, 857C
Joined
·
330 Posts
Discussion Starter · #13 ·
I also took a couple parts off the engine and a part off the shroud to put them in the parts washer and to sandblast them......
Natural material Cuisine Dish Wood Ingredient
Brown Wood Artifact Metal Carmine


In the parts washer......
Fluid Gas Drink Automotive exterior Auto part


All washed and sandblasted, now they are ready for primer and paint.....
Wheel Automotive tire Bicycle part Alloy wheel Motor vehicle
 

·
Registered
Craftsman's 855C, 856C, 857C
Joined
·
330 Posts
Discussion Starter · #14 ·
3 out of 5 of the parts are all painted, I got 2 coats of primer and 2 coats of white VHT paint on them.....
Table Wood Kitchen appliance Rectangle Flooring
 

·
Registered
Craftsman's 855C, 856C, 857C
Joined
·
330 Posts
Discussion Starter · #16 ·

·
Registered
Craftsman's 855C, 856C, 857C
Joined
·
330 Posts
Discussion Starter · #17 ·
Well I got an "update" on the tractor if you call it that. I went to my local tractor supply before I went to work one day to start thinking about paint and see if there was some yellow paint I could use for cheaper, instead of that special $40 a can paint that I used on my other tractor that would be a VERY close match to the original color. I also went in for a new belt to put on the shroud and starter generator. I took the top of my battery box off my other Craftsman to compare paint, and I ended up buying 1 spray can of Majic Cub Cadet yellow because when I looked and compared it with my battery box it looked nearly identical. I also asked the cashier when I bought it what he thought and he said it is the closest I will get to my battery box, well I got it home sprayed it on a little piece of paper and this is how it came out......
Brown Fluid Amber Wood Cuisine


These pictures above and below are from tractor supply, notice how it looks VERY similar in the below picture but maybe its the lighting in the camera. It looked the exact same in the light in the store too so I took a gamble and unfortunately lost.......
Fluid Material property Gas Liquid Solution


On another note, we have a couple other cans of yellow paint at home so I figured I would try one of those too on a piece of paper. When I sprayed it unfortunately it came out too light so It looks like I'm gonna have to go with my special $40.00 a can again.....

Gas Tints and shades Lamp Light fixture Circle
 

·
Registered
Craftsman's 855C, 856C, 857C
Joined
·
330 Posts
Discussion Starter · #19 ·
Is that a Cub Cadet!?! LOL
No sir it's not sorry, lol. I see what you did there though. That's what people would say too when it even says Craftsman on the nose; well that what you said OR "hey nice Cub Cadet" but it's the same colors as a Cub too so i GUESS i see where they come from.
 

·
Registered
Craftsman's 855C, 856C, 857C
Joined
·
330 Posts
Discussion Starter · #20 ·
Well folks,

I got some good but bad news, my gas tank got sandblasted the other day and it has a small hole in it. It can easily be repaired but it was something that I didn't expect. I will try repairing it myself, if not bring it to someone if need be.....
Wood Door Plumbing fixture Gas Water
Automotive lighting Bumper Vehicle door Automotive exterior Gas
 
1 - 20 of 68 Posts
Top