Tractor Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter #1
i got one of those 46" two stage bolens snowblower attacment for my 1669l tractor and i was wondering if anyone know of an interchagability of the front shear bolts for the augers not for the fan!!!!!
 

·
Registered
Joined
·
1,569 Posts
Do you have the model # of the blower ?
If you post it, I’ll check if I have a parts list on it and will post it
if I do.
 

·
Registered
Joined
·
50 Posts
Discussion Starter #3
model 50146 i already tried getting the original parts as i have the part numbers and they are no longer available!!!!!
 

·
Registered
Joined
·
2,687 Posts
jt

Is it an actual bolt or a roll pin? If it's a bolt you can probably use any shear bolt of the correct length even if you need to drill the hole larger. I think most shear bolts are 5/16. At least on my craftsman they are.

If it's something unique, as I'm not familiar with the 2 stage blower, try Ray's Mower. I'm pretty sure they'll have some.
 

·
Registered
Joined
·
1,569 Posts
Jt..

sixchows is right. I'm sure 1 of the parts guys he listed will be able
to cross that Pt# to a shear pin they have.
Go to the Boles section of this forum and click on the 3rd thread
down called "Parts Suppliers" all their contact info is there.
 
1 - 8 of 8 Posts
Top