Tractor Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I was using my rotary cutter on the grass beside my driveway; I stopped it for a minute to dismount and clear some debris out of the way. When I tried to re-engage the PTO, nothing happened. The switch is a rocker type on the right fender, with a light in it to indicate that the PTO is engaged. The switch did not light up, none of the indications that the PTO was engaged were on the instrument panel, and the shaft did not spin. I'm guessing it's either a bad switch or solenoid / relay. Any suggestions on how to determine which one is the culprit?
Thanks!
 
1 - 3 of 3 Posts
Top