Tractor Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
First post, hello all and thank you in advance.
My issue started when I was using tractor mowing brush in between bedded pines, bush hog got stuck and 3 point quit working. after tearing it a part we found that lift cylinder pump housing was broke in several places and the bolts were shared off, we replaced the pump, bolts, new pistons, rod, and rings. 2 times now, all seems to goes together correctly. but before 3 point can be lifted all the way up in about 10 seconds, (lift arms only appox. 3/4 of the way up), the cylinder has blew apart 2 more times making 3 times including the first time, what are we missing or doing wrong? your help is needed!
 
1 - 2 of 2 Posts
Top