Tractor Forum banner

transmission

  1. Repair & Technical Discussion
    I am considering purchasing one of these tractors, but it has some issues and I wanted to get an idea of how serious and expensive these would be to repair. Hydraulics - it appears that behind the hydraulic oil filter there is a leak that goes into the transmission housing. Current owner...
  2. Repair & Technical Discussion
    Hi I am looking for a spares manual or a shop manual for a John deere 7800 transmission section that need to be opened.
  3. Classifieds
    I am looking for an 8 speed transmission for a 1992 Ford 4630 preferably in Canada. Prefer parts to rebuild ,if not a complete transmission in good working order. The same transmission as used in models Ford 3430, Ford 3930 ,Ford 4630 and Ford 5030
  4. Oliver
    I inherited grandpas 1650 diesel. After some much needed services she was up and running. How ever 5th and 6th gears would only grind. Would not even slip in with the engine off. I only use it around the place to blade the driveway and such. Well now after 5 years she is down to only 2nd...
  5. Kubota
    My old Kubota L225DT won't go into 1st or 3rd; 5th or 7th. Works fine in Reverse, and in 2nd/6th and 4th/8th. I have been using it for the past few years like this, but I have the tractor split for a new Clutch, so was wondering if I could get some advice / suggestions on how to fix the shifting...
  6. Attachments, Implements & Accessories
    When I stop my MF 165 on unlevel ground the transmission locks up. If I turn the engine off the lock releases and I am free to go.
  7. Repair & Technical Discussion
    Have a massey ferguson 1552 dyno It is slipping in 3 & 4 ,on turtle or rabbit Lower gears 1 & 2 seem to work. Clutch plate seems to engage. I was wondering if hydraulic pressure could be causing this or bad relay I believe there is a relay for 1&2 and another for 3&4. Anybody have any suggestions
  8. Ford / New Holland
    After about an hour my machine won't go as fast in forward or reverse and within moments won't move at all.... Revving up the engine does nothing. After letting it sit for a couple hours it's back to normal. I've been through the usual, changing fluids, new filter, I cleaned out the radiator...
  9. Repair & Technical Discussion
    I have a kioti 1914? with a 4 speed high low that won't come out of 3rd. When it was shifting it would not stay in 4th or go in 4th very well. 1st and 2nd worked well. How much should it cost to rebuild a transmission?
  10. Repair & Technical Discussion
    Hello I was given a Scotts S2048 and the other day I went to give it a check up, and noticed the Transmission oil is low, I found the manual and it says to use 5W30 synthetic transmission oil but only can find Amsoil that states the weight, I can only find that Oil online and would like to get...
  11. Cub Cadet
    I have a cub cadet 5254. Lost hydraulics to deck and pto first. Then lost hydraulics to steering and it stopped moving forward and reverse. My question is does this tractor have a hydraulic pump and transmission or are they both combined in the transmission? Does this sound like a pump issue or...
  12. Ford / New Holland
    Good morning all, Purchased a 1963 Ford 4000. Has a select o magic transmission 2 wheel drive with loader & pto. Replaced almost every hose to new in the past year. It was purchased from a a local guy who stated it only had high gear only. When it was at our warehouse where the tractor was...
  13. Cub Cadet
    So last night I was driving my Cub Cadet 3235 in the dark. I was going at a pretty good clip when SLAM I ran head on into the cast iron septic vent pipe which stopped the tractor dead in its tracks and dented the deck pretty bad too. I was able to back the tractor out from the pipe, but then...
  14. Repair & Technical Discussion
    Hello - I'm new to this forum and have run into an issue. I bought a 1968 Ford 3000 to restore as a project for myself during college. (I've never done this before and am learning as I go) I've been working on it and I am now trying to replace the front transmission oil seal. The tractor is...
  15. Repair & Technical Discussion
    Hey guys, not sure if it's a common New Holland thing but I cant find anything out about it. I have a New Holland T7 190 with a power command transmissionand went to change the big filter inside of the plastic housing and there is a fair amount of metal filings sitting in the bottom of the...
  16. Repair & Technical Discussion
    My Case IH 4210 MFWD with Cab and the 16x8 transmission (partial power-shift) won't shift into low range. I can shift into high range and reverse with no issues. Rabbit/turtle power-shift working fine too. When I try to shift into low range it'll just grind gears. Need new clutch? Or is there...
  17. Repair & Technical Discussion
    Hey all, So first post and new to tractors. Just got a 12 acre farm in Ca and am looking to have a small homestead with all the fixings. Right now I have a late 70's-early 80's tractor that I've been bringing back to life. The engine is solid and the hydraulics and PTO all work. Right now my...
  18. Repair & Technical Discussion
    First time posting. I just picked up a Cub Cadet 7260 for cheap because the guy said it wouldn't go in reverse. I got there and it wouldn't move at all. This is a manual. The clutch is adjusted as much as it can be and there is still 4"-5" of free play. I realize it needs a new clutch, the...
  19. Craftsman / Sears
    My 917.272670 lawn tractor doesn't seem to go forward or reverse. The shift lever seems to go into each of the gears, but the tractor will not move when in any gear. I was wondering if anyone ever encountered this problem? Thanks Paul
  20. Ford / New Holland
    I've got a 1988 Ford 3910 diesel. It has a high and low lever for the transmission. The high gears began to slip and then stopped working all together. I can still run pretty well in the low gear range. Do I need to replace the clutch?
Top