Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Repair & Technical Discussion
    I have a TYM T273 from 2006 and when I hit the button for the PTO it starts up but stops when I release the button. Why? How can I fix this? Thanks in advance for any suggestions
  2. Chinese / Grey Market Tractors
    I have a TYM T273 from 2006 and when I hit the button for the PTO it starts up but stops when I release the button. Why? How can I fix this? Thanks in advance for any suggestions.
  3. Repair & Technical Discussion
    On an old mower (F525) I am replacing the old carburetor and it has a backfire solenoid valve, but it was broke and I tossed it in the garbage. I got a new carburetor to replace the old one and saw that the bowl plug (where the backfire solenoid screws into the bowl) has a needle valve attached...
  4. Craftsman / Sears
    Hello, My Craftsman GT 3000 does nothing when turning the ignition key. No click, no sounds. I used a multimeter and tested the battery, the ignition switch, the pto switch, the brake switch, the positive cable to the solenoid from the battery, the blue wire from the solenoid to the ignition...
  5. Kioti
    when I depress the switch, it illuminates and also lights up the 4WD indicator on the dash. But I hear no engagement or don't see the front wheels engaging. Not sure if the PTO operates off the same solenoid but the PTO still works. Any ideas? 1300 hours on the tractor with no issues at all...
  6. Introductions
    Greetings from Michigan, my name is Dan. I've been lurking for a long time off and on. I am mechanically inclined and no stranger to lawn mowers/tractors, but now I need some help. I have searched the forums extensively and cannot find a viable answer to my problem. I have a Cub Cadet XT2 LX46...
  7. Long / Farmtrac / Montana/ LS
    Does anyone have any suggestions (maybe photos, too) of homemade slip covers (PVC sheaths?) or other designs that they use to protect the solenoid/starter assembly wiring from damage during brush-hogging? I’ve assumed the role of operating my father’s Long 2310 to control the ever-invasive...
  8. Small Engines
    Ok ... so i got a Honda 125cc cdi atv motor in my tractor .... seperately i got a Honda 389cc OHV on my tiller( i pulled it out of a old 6500w generator and got it going ...) I know the atv motor has a dynamo for recharging the battery ...working the cdi etc ... but now i wanna hook up the...
1-8 of 8 Results
Top