Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. Ford / New Holland
    After blowing and replacing the hydraulic hose next to the cooler, tractor steering is way loose. (Turn the steering wheel 720 degrees to move the wheels.) Is there a way to bleed air from the system? Where to start looking? Thanks! N
  2. Ford / New Holland
    I'll keep it simple. First, I am not a mechanic but i have a desire to learn as much as possible about this tractor and rebuild it over time. For this thread, I am having a problem with the power steering. It was low on power steering fluid, so I added more than quart. It responded well. Now...
  3. Massey Harris-Ferguson
    Hello all! I recently bought a 245 MF, Serial # 9A250460. I bought the tractor with the orbital gear already off, because it was leaking. I ordered the parts and fixed the leaking problem. But, I am having a heck of a time bleeding the air out of the system. I finally got it bled and drove it...
  4. Massey Harris-Ferguson
    Good evening all, While getting the MF240 back up and running found the power steering pump was very low on fluid. Topped it up and the right-side steering cylinder displayed a pretty serious leak. Removed both cylinders and took them to local hydraulic shop for rebuild. Right cylinder still...
  5. Repair & Technical Discussion
    Hello, Just bought a Ford 2000 with an aftermarket AHS (Anadolu) power steering system. I found a hole on the bottom of the cylinder that will constantly leak when the tractor is off (hole is part of the original design I found out just not sure what the purpose is) and will squirt out when the...
  6. Ford / New Holland
    Hello, New to the forum. I have a Ford 4000 diesel that has developed a leak in the power steering gear housing around what looks like a plug of some sort. I haven't been able to find any information on it in the FO-31 manual or out on the web yet. An guidance would be appreciated. I'm really...
  7. Repair & Technical Discussion
    I am having a problem find the proper torque for the (4)cap screws #48 in diagram attached and the castellated nut #23 in diagram attached for the valve spool bolt #35 in diagram attached. The Spec sheet attached is not clear.
  8. Repair & Technical Discussion
    Hello again, Working on trying to stop P.S fluid from leaking all over the ground by rebuilding my Ford 4000 power steering ram(cylinder) and found a couple interesting things. 1st thing is that the main cylinder case has a small hole that looks like a valve pin should go there but looks like...
  9. Ford / New Holland
    1969 Ford 4000 Diesel, Power steering is Leaking in 2 places so I want to rebuild it but I'm finding conflicting information and parts. My tractor does not have a fluid reservoir, and the service manual show that it should have one and the ram is different. The parts manual shows other styles of...
  10. Repair & Technical Discussion
    I recently bought a 1962 IH 460 tractor. The power steering does not work. I have read many post on this issue. Mine seems a little different. I have good power steering pump pressure. 1700# static and 1100# with good volume. Half a five gallon pail in about a minute. The problem I think is it...
1-10 of 10 Results
Top