Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. Ford / New Holland
    We have a 7700Ford with fuel in oil It has a minimec pump on it The drain was plugged and was getting fuel in oil Sent in pump and was repaired Installed and ran about 32 hours and was giving no trouble Now it is getting fuel in the oil again Any ideas? I have checked the overhead...
  2. Repair & Technical Discussion
    I’m trying to find a list of all the oil/hydraulic/air filters ref# for my Case 75C. I’m also curious to know what brands that you have found to be suitable replacements (ie. Wix)? And where you have found to purchase reasonably? Thanks
  3. Petroleum, Oils, Lubricants, Additives, Chemicals
    Hi, I have recently bought a Deere 68 ride on and before moving it tore the transmission apart and found it empty. After days of searching online I am very confused what to fill it with. Some say corn head grease, some say 80w-90 and some say 20w-50. Does anybody know the right thing to use...
  4. Petroleum, Oils, Lubricants, Additives, Chemicals
    Good evening friends. I have a question that has been bugging the heck out of me for a couple of days. Time is due for my 50 hour service and nothing noted in the instruction manual regarding to what filter parts and even a cross reference option. I contacted branson directly by email, checked...
  5. Repair & Technical Discussion
    Hi - I have a 1977 IHI Shibaura sd4000a 2 wheel drive. The hydraulic arm is going up but won't stay up when I disengage the drive. I think the hydraulics and gears have the same oil top up. When checking the level it is good but creamy white. I want to drain it and refill but am not sure which...
  6. Petroleum, Oils, Lubricants, Additives, Chemicals
    I am new to machinery, just bought a 2000 new Holland 555e. I had to take a hose off to replace a leaky fitting. I noticed the hydraulic fluid was milky. Is there a way of getting the moisture out of the oil without having to do a complete fluid change? Thanks.....
  7. Ford / New Holland
    Guys, I was on here about a year and a half ago and rebuilt the engine on my 72 Ford 3000 Gasser all the way through. It was successful thanks to alot of hard work and advice from you guys. Now it's time for the rear of this tractor. After getting it running I noticed the 3point is very...
  8. Repair & Technical Discussion
    Hi, We inherited a 1962(3) Simplicity 725 Garden tractor. It hasn't been run in about 8 years (when my fiancee's father past away). He took great care of it and used it til the day he died. Since we finally have a house we are able to store it and use it. When we first moved it to our place...
  9. Yanmar
    For Yanmar and Yanmar made John Deere CUT tractors. Yanmar Check And Maintenance Tractor Manual for SCUT and CUT models dated 02/18/2014. This covers back to the YM Series as this was pulled from Yanmar Japan website. John Deere Lawn & Grounds Care Division Compact Utility...
  10. Operating & General Discussion
    Hey boys we had a dust up over here. A good amount of diesel engine oil was put into the rear hydraulic oil reservoir on the kubota bx. I'm assuming the hydro fluid needs to be drained completely and replaced. How many gallons for a kubota bx series? Thanks
    oil
  11. Husqvarna
    At the end of last year I had smoke coming out from under my hood once in a while and pushed it out of my head until this year when i saw oil/gunk(pic A) The Oil spill happened when I was filling it after a oil change. But the motor Was wiped CLEAN. There was only oil on the frame no where else...
1-11 of 11 Results
Top