Tractor Forum banner
oil leak
1-6 of 6 Results
  1. Classifieds
    As the subject line states, I'm looking to purchase an oil pan for my 1961 Oliver 550. While running it yesterday, noticed a stream of oil coming from the pan and could tell it was due to a hole in the pan. Dropped the pan today and noticed a fair amount of pockmarks in the pan itself. Patched...
  2. Yanmar
    Hello all and thanks in advance for any advice provided. I have recently acquired a YM1702D (FYI, I've never owned a tractor before) and seems the clutch will not disengage. To get the tractor moving I had to force it into 1st gear (just a slight bit of grinding) and did this only to load it on...
  3. Repair & Technical Discussion
    Does anyone have a photo of a D1305 motor from the left side (w/starter). I have a hidden oil leak behind the 6" wide frame plate. All the photos of motors out of the tractor are taken from the right side and I do not know what else could be leaking oil on the left. The oil pan is all I can...
  4. Repair & Technical Discussion
    Does anyone have a photo of a D1305 engine in a Kubota. I replaced a bolt in the subframe and had the wrong washer. Apparently it made the bolt just enough too long and has created an oil leak from behind the top left bolt (circled green). I have no idea what it could be but maybe a soft plug?
  5. Repair & Technical Discussion
    I have a Ford 1320 with a hydraulic leak. Oil leaks from the tube between the HST filter and the transmission case. I put a new "O" ring on the line where in fits into the case but still leaks while running and static. I put a washer between the line and bracket that holds it in place to make it...
  6. Ford / New Holland
    Hey Everyone! New to tractors, just picked up a Ford 4500 Indistrial to clear some land we bought to build a new home, the hoe was removed unfortunately but the loader has an incredible amount of power. It is the power reverse trans. First off I seem to only be able to get it in 1st or 3rd...
1-6 of 6 Results
Top