Tractor Forum banner

new holland

  1. Repair & Technical Discussion
    Hi all. I am running into a new issue with my 1999 New Holland TC 18 tractor. I've been having fuel issues. I had some gunk from the tank clog up the incoming fuel line. So, I drained tank and tried to get rid of as much debris as possible then rehooked up the lines and bled the lines and...
  2. Repair & Technical Discussion
    When I start the tractor, the initial battery charging voltage reads out between 11 and 12V. Under normal operating conditions the charging voltage will be a little over 14V. If it takes more than 30-35 seconds after startup for the charging voltage to jump up to 14+V, an error code appears...
  3. Introductions
    Hello everyone, I'm new to this form and still trying to figure out exactly how it works, anyways long story short I purchased a tractor about a year ago it's a Ford 4000 with skip loader, not sure of the exact year but when I resealed the injection pump it had 1962 stamped on the inside so I'm...
  4. Ford / New Holland
    Hello, I have a 2010 New Holland tn75sa that is pulling the 3-6 fault code. Immediately after having it delivered i realized there was an issue and the dealer brought it back twice to be fixed then refused to tow it back again after delivering it to me the second time after merely clearing the...
  5. Buying & Pricing
    I'm currently on the search for a compact tractor. Mid mower, front lift (uses for snow plowing and house work, backhoe would be nice but necessary. I only have about 2 acres to mow so I'm only interested in a mid mower. Quarter acre curvy driveway to plow and would be nice to use a backhoe to...
  6. Repair & Technical Discussion
    I'm new to this site so hopefully I'm doing this correctly. My battery went dead on my new Holland. I put a 6anp charge on the battery till it was fully charged. It started right up. So I got off and took the battery charger off. About 20 seconds went by and the engine quite. So I tried to...
  7. Classifieds
    Original owner, 870 hours, runs good, maintained per service manual, comes in two pieces, needs new center casting . Includes 12LA front-end loader with 60” smooth edge bucket and 914A 60” mid-mount rear-discharge mower. Willing to split up or part out as needed. Reasonable offers on any part...
  8. Ford / New Holland
    I was running my bat wing mower a few weeks ago and the tractor randomly started shutting off. I've owned this tractor since November and have only put about 6 hours on it myself so I don't know much of the history(It was included with our house) and it's the first diesel I've ever owned. I...
  9. Repair & Technical Discussion
    I have a 2009 New Holland TL100A. I've never had any problems until now. I accidentally popped the clutch and killed the motor, now no fire anywhere. No dash lights, the starter does not engage, there is difficulty moving forward/ reverse shift lever. The gear shift works fine. I was wondering...
  10. Operating & General Discussion
    I'm looking for Operator's Manual for New Holland T7.220, 235, 250, 260, 270. I have one, but it's pretty beat up. A digital copy would be fine. Free-to-cheap would be best. I know New Holland gives these out with proof of purchase, but I'm short in that area. Thanks
  11. Ford / New Holland
    I am not positive on the model, so here are the numbers if that helps... KF3PW2 4P23B *A426525* I am confused about the 8x8 transmission clutch pack. According to the manual and everything I have researched, there should be 5 steel discs and 5 friction in each side. But when I opened mine up to...
  12. Repair & Technical Discussion
    I am not positive on the model, so here are the numbers if that helps... KF3PW2 4P23B *A426525* I am confused about the 8x8 transmission clutch pack. According to the manual and everything I have researched, there should be 5 steel discs and 5 friction in each side. But when I opened mine up...
  13. Repair & Technical Discussion
    I have a used 2011 New Holland TD80D with 870 hours on it. I was pulling a small planter when it lost power and died. I bled air out of the fuel line and operated the manual pump and it restarted, but died about 10 minutes later and would not restart. I changed both fuel filters, added...
  14. Introductions
    Retired from my day job as an electrical engineer and gone to raising cattle. Bought a used 2011 New Holland TD80D to plant grass, harvest hay, etc. Having more trouble with it than a man on the wrong train.
  15. Repair & Technical Discussion
    My 545 started leaking power steering fluid late last year (I bought it last spring). With my lack of mechanical knowledge, I just put new steering fluid in it and it worked just fine, until the next time I ran the tractor. Adding steering fluid to the pump was the band aid that I used when I...
  16. Repair & Technical Discussion
    Hi everyone! We have a New Holland t1510 with a series 930gh backhoe attachment. The service guy cross threaded the fitting on the dipper line and it’s leaking like crazy. I am capable of changing out the fittings but need advice on how to depressurize the system before working on it- ideally...
  17. Ford / New Holland
    Last fall I bought a 2005 NH TL90 with a 52LB loader using joystick control. I used the tractor brush hogging for several hours this fall with the attachment plate off the front of the loader (long story). During that time the loader boom seemingly worked normally. I'm not sure of the last time...
  18. Ford / New Holland
    I have a 3010S that I've had the Bosch injector pump rebuilt and installed but now it won't rev past 1200 RPM and I'm looking for some ideas on what I may be overlooking. (shop rebuilt, I installed) So far, I've replaced all the plastic fuel lines, installed a new fuel filter (single filter...
  19. Buying & Pricing
    Hey Guys, I have the opportunity to buy a NH268 baler with a kicker. Don't know much about it. Has not been used in 2 yrs but in a barn. Would it be worth buying ? I am new to baling and would be baling a 17 acre newly planted field next yr. Tractor JD 4020. I Thanks
  20. Repair & Technical Discussion
    Hi - Am I the only one in the entire world that has had issues with the Shuttle Shift, Parking Brake, and front end on these tractors? I also cannot haul a bale of hay on my three point hitch without it falling off. Once lifted, the points point down and the bale falls of going up hills. Had...
Top