Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Massey Harris-Ferguson
    Hello I have a Mr 35 with the z134 engine and it threw a rod and two of the valves. I found all the parts I need except the valve spring retainers. I only need one intake and one exhaust but am willing to buy a kit if I can find it. Does anyone know where to get them. Thanks
  2. Massey Harris-Ferguson
    Hello, This is my first post so I may not be accurately describing my questions, but I will try my best. Our Massey Ferguson 35 has had a hydraulic leak around the hydraulic lift cover block off plate, also known as the transfer plate. I decided to fix it by replacing the o-rings inside...
  3. Full size Tractors
    Workshop Service Manual for Massey Ferguson and Ferguson MF & TO 35 50 Tractors
  4. Massey Harris-Ferguson
    Owner's manual http://www.mediafire.com/file/92wdp5jsjf08t3h/Ferguson_TO-35_Tractor_Owner%25E2%2580%2599s_Manual.pdf/file Service manual http://www.mediafire.com/file/797nwa1ecj21s70/Ferguson_MF_%2526_TO_35_50_Tractors_Workshop_Service_Manual.pdf/file Parts manual...
  5. Repair & Technical Discussion
    I am rebuilding the engine on the above tractor. It has a dual clutch. I have noticed that the there is oil in the clutch bell housing. I assume that the seal on the primary shaft is leaking. BUT I have no idea how to access the seal. I have removed the clutch thrust bearing fork and the 4 bolts...
  6. Repair & Technical Discussion
    I am rebuilding the engine on the above tractor. It has a dual clutch. I have noticed that the there is oil in the clutch bell housing. I assume that the seal on the primary shaft is leaking. BUT I have no idea how to access the seal. I have removed the clutch thrust bearing fork and the 4 bolts...
  7. Repair & Technical Discussion
    I am rebuilding the engine on the above tractor. It has a dual clutch. I have noticed that the there is oil in the clutch bell housing. I assume that the seal on the primary shaft is leaking. BUT I have no idea how to access the seal. I have removed the clutch thrust bearing fork and the 4 bolts...
  8. Introductions
    I am retired, but my wife and I run our ten acres as a homestead. I have never worked harder in my life!:D I have two vintage tractors. My MF35 diesel and my Ford 601 Workmaster. If one doesn't run the other does ... at least so far.;) BTW, I am going to do a tuneup on my Ford 601 with a...
  9. Introductions
    Bought 5 acres 2 years ago to build on had to buy a tractor to mow it got a '61 MF35 diesel that needed some TLC, Great tractor. Have 3 wonderful children 2 girls 10 and 9 and a boy 3. Hoping to get the new place built in the next year. Great job with this site, should enjoy it almost as much as...
1-9 of 9 Results
Top