Search Results for ‘massey ferguson’

Hello, This is my first post so I may not be accurately describing my questions, but I will try my best. Our Massey Ferguson 35 has had a hydraulic leak around the hydraulic lift cover block off plate, also known as the transfer plate. I decided to fix it by replacing the o-rings inside...

I suspect it is the reason my tractor won't start. Where is it, how do I best test it? Thanks for any assistance!

Hi I have a mf35 1959 4 cyl diesel and I wanted to know if it was possible to fit a diff lock? Also if it is possible, what parts would I need? I am quite practical and have rebuilt the engine on this mf35 but before I tear the rear ended to bits I wondered if anyone else had done a similar...

Good day We recently bought a secondhand Massey Ferguson 165 tractor (year and hours unknown). The tractor is fitted with a MK2 hydraulic pump. The lift or pump however do have so issues. When we try to hook and pickup/lift heavy implement (slasher) the tractor does not want to lift the...

We have Massey Ferguson Ebro 6080 with Perkins 4.248 (4.1L displacement / 248ci) 4-cylinder engine and it's dying. So I wonder if it's possible to put a Perkins 6.354 (5.8L displacement / 354ci) 6-cylinder engine that is his equivalent? I know that the bigger tractor Ebro 6100 have the Perkins...

Hello Bought a used GC2310, no idea what year... research tells me ran from 2004 to 2008? My issue is that after a while the hydraulic oil seems to over heat and I lose all hydraulic power other than driving. I let it cool and it lifts decent for a time. I've read so much my head is spinning...

Hello! Having lived on my 5 acre mostly wooded lot for the last 12 years, I figured it was about time I invested in a tractor to help be a bit more efficient. I'm somewhat mechanically inclined, am able to diagnose and fix most problems that come up with the dirt bikes and daily drivers...

I am looking to buy a service manual for a Massey Ferguson 4707. Does anyone know where i can buy it online?

I'm currently on the search for a compact tractor. Mid mower, front lift (uses for snow plowing and house work, backhoe would be nice but necessary. I only have about 2 acres to mow so I'm only interested in a mid mower. Quarter acre curvy driveway to plow and would be nice to use a backhoe to...

Illustrated parts catalog for Ferguson TO-35 tractors

Workshop Service Manual for Massey Ferguson and Ferguson MF & TO 35 50 Tractors

Owner's Manual for Ferguson TO-35 Tractors

Owner's manual http://www.mediafire.com/file/92wdp5jsjf08t3h/Ferguson_TO-35_Tractor_Owner%25E2%2580%2599s_Manual.pdf/file Service manual http://www.mediafire.com/file/797nwa1ecj21s70/Ferguson_MF_%2526_TO_35_50_Tractors_Workshop_Service_Manual.pdf/file Parts manual...

Hello to all my Tractor Forum buddies , I have purchased my fair share of wrong tractors and have almost killed myself driving them. If I don't die while using the tractor, my wife will kill me anyway. Please help me with some suggestions. I have 28 acres on the side of a mountain in upper New...

my pto will not go in reverse will work find in forward took top cover off and looks like it is moving the the rear ok is there something I am missing here. also at the same time the 3 point is not wanting to go back up looks like the fluid is thin I just replaced it last summer with some...

Hello all, I have an old MF Super 90 with a leaky Perkins diesel. When I started it, there was toffee colored oil spitting out of the side of the engine where the exhaust connects. I have since drained all the oil out and took the cap off the engine head. There are beads of water and some rust...

Does anyone know where you can buy a head gasket for a 1140 without buying the entire engine gasket set? I know these tractors were only made for a few years so parts a few and far between.

Hi there I have a mf 135, I was coming home today and parked up the tractor in the shed. When I was going out I found this piece on the ground and it is the same colour as the body of the tractor which was recently sprayed. Can someone please tell me what this is and if it is important for the...

I recently traded my set of Massey Ferguson 43 plows for a set of Massey Ferguson 82 plows. The 82's are 5/16's. I would like to know if they can be converted to 5/14's. So if anyone knows how I would appreciate and information that you can give me. My 43 plows are 3/14's and the operators...