Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 89 Results
  1. John Deere
    When raising and lowering my three point hitch on my 4120, I'm having a problem. Raising the 3pt works great. It instantly goes up. When I try to lower the 3pt, it hardly budget. If I leave my rock control in the down position for about 15-20 minutes, it will eventually creep down. I have...
  2. Classifieds
    John Deere cab doors made by Curtis Cab. Both left and right doors are in great shape. These are the hard doors and not the soft flimsy ones. All glass and sliding windows. Curtis Cab shows these doors as fitting John Deere models 3120, 3320, 3520, 3720, 4210, 4310, 4410, 4200, 4300, 4400. These...
    $800 USD
  3. Classifieds
    I'm looking for hard doors to fit on my John Deere 4120 tractor. It has a cab built by Curtis Industries. Please PM me if you have the doors. I believe that numerous 4000 doors will fit. Thank you.
  4. John Deere
    Hi all! New to the tractor world. I recently purchased a 1980 2240 independent PTO No Hi/Lo 350,000+SN. I am unable to get any fluid to the front hydraulic pump. I have cleaned the trans. screen (it was very dirty), changed the filter, and cleaned the screen at the front hydraulic pump. I...
  5. John Deere
    I am looking for the entire three point hitch as well as the hood and front bumper for a John Deere 4120 tractor. Please PM me or email me at wwyc@sbcglobal.net
  6. John Deere
    i have a john deere 3155 with 6500 hours on it in the shop, customer complaint is a low tranmission pressure light unverified and the pto kicks out when shifting from hi to lo range, that i have verified only when fluid is warm. im working on getting a gauge to check pressures at the shift...
  7. Attachments, Implements & Accessories
    Hi everyone! Showing off another custom fabricated tractor cab by my father Brad Gray. This post is not an advertisment, just simply trying to show off some quality craftmanship with anyone whos interested and appreciates real custom fabricated work. These posts are only intended to provide...
  8. John Deere
    Hello, I have a John Deere B with a serial number that I'm not finding on any of the lists online, attempting to figure out what year it is. It has two fuel tanks 2 cylinder engine Square exposed radiator Side exhaust One brake pedal Two speeds 1 in Low - 2 when in high No battery spot...
  9. John Deere
    Hello, I'm new to the forum, but looking to get some help with repairing my fathers tractor. He snagged a stick which ripped out some wires under the pedals and now it will not move forward or reverse, although all other hydro systems function and it runs fine. I see that its a drive-by-wire...
  10. General Lawn Garden Tractor Forum
    Attention manufacturers! Can someone manufacture hand string or hand lever or foot lever started lawnmower tractors? I am tired of dealing with bad batteries and lawnmower batteries are impossible to find where I live and those odd-shaped lawn tractor batteries are so expesive, often costing...
  11. Introductions
    Hello, Here at Blacktrac Ltd, we are an established, professional company supplying new and quality used, low houred compact tractors, implements, plant and commercial mowing equipment. We are a family run business with a strong agricultural and farming background. Fun question to start with...
  12. John Deere
    I have a 2009 fairway Deere mower that I can't find the short circuit on and need some suggestions. I've already gone through the powered side of the circuit and it has power from battery to starter, and from starter to F3 Key switch fuse (pictured) and other side of key switch fuse has...
  13. Repair & Technical Discussion
    So I was brush hogging with my John Deere 606 rotary cutter and my slip clutch came off and now I can’t get it and the holder to stay on the splined driver shaft. Does anyone know or have advice on how to fix this issue? I attached some pictures of my problem. Any help is greatly appreciated!
  14. John Deere
    Hi I have an early 2000s John Deere 2210 with 1800 hours on it that is used for mowing and snow blowing with PTO attachments. A month or so, the radiator got clogged and the coolant overheated and blew the cap on the reservoir. Ever since then I have had an issue where the tractor usually won’t...
  15. Repair & Technical Discussion
    My Deere lx288Lawn tractor will only start if I jump it with my car. The battery tests good amd it is brand new. I try to start it and nothing.. not even a click no lights light up.... nothing. But as soon as I hook the jumper cables up from the car, it starts immediately. I took that same...
  16. John Deere
    Has anyone just bypassed the original transfer pump and used an electric pump to supply fuel to the filters and on to the high pressure pump? If so would 14PSI and 30GPH be enough to keep everything running fine even under heavy loads.
  17. Attachments, Implements & Accessories
    Hi Guys n Gals, Im new to owning a tractor sooo. I have a John deere 6430 premium. Im wanting to know what Front end loaders will fit. Could you send me some model numbers if you know. And if anyone has one in Australia for sale let me know. Thanks in advance.
  18. Repair & Technical Discussion
    I recently broke one of the crappy original plastic pistons in my loader joystick and figured I could buy the parts and fix it myself. It didn't seem too complicated but there is one thing that seems to not add up. The replacement piston part (R230282) is structurally different than the...
  19. Repair & Technical Discussion
    Helou everyone Can some one help me? I have this tractor and I can not start him! It was my father's tractor! My father died 8 months ago. He overturned another tractor and died! Not this one 😢 but man! And this battered tractor fires phenomenally even though it’s overturned! Can some one have...
  20. Repair & Technical Discussion
    So I just removed the old clutch and the way it was in was with the pulley facing the motor. The new clutch I got has a spacer inside preventing me from putting it in that way and has a caution sticker saying to have the coil face the motor not the pulley. So if I put the new one in the only way...
1-20 of 89 Results
Top