Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 63 Results
  1. Ford / New Holland
    Hey all, Hopefully I can find some help here. My father has a 1986 Ford 1710 with a Woods Du-Al 155 loader, and he has an issue that’s odd, I cannot seem to find any help already discussed. Problem: Loader will not rise or tilt upward if the 3-Point is at max height, if any movement at all, it’s...
  2. Kubota
    Okay I have a Kubota b1550d with loader that has such low hydraulic power it’s embarrassing. Okay when you turn on tractor the 3 point won’t even come up with my dad standing on it without throttle. Been going on for a year. I need help I refuse to let it die bc it has 1500 hours on it. So far...
  3. Massey Harris-Ferguson
    Good evening all, While getting the MF240 back up and running found the power steering pump was very low on fluid. Topped it up and the right-side steering cylinder displayed a pretty serious leak. Removed both cylinders and took them to local hydraulic shop for rebuild. Right cylinder still...
  4. Massey Harris-Ferguson
    Hi guys, I have a Massey 231 with a Koyker 210 loader and a flow switch to control between 3 pt and the loader (aux). I have plenty of fluid (just below Max) The 3 pt stays put but lately the bucket tilt drops and if I use the tilt the arms will drop. If the bucket tilt drops the whole way the...
  5. Repair & Technical Discussion
    I’m trying to find a list of all the oil/hydraulic/air filters ref# for my Case 75C. I’m also curious to know what brands that you have found to be suitable replacements (ie. Wix)? And where you have found to purchase reasonably? Thanks
  6. Kubota
    New to the forum and thanks for any help your provide. Bought a used L47 last year and was having some issues with the hydraulics. The bucket kept dropping and pointing downward in a short while and the 4 in 1 bucket wouldn't hold a tight clamp on items. Took it to Kubota to have them check...
  7. Kubota
    I have a Kubota B2920 It has a standard front loader. I put a diverter valve on the front to alllow me to use a snow plow. It works great for that. HOWEVER…. I purchased a grapple. WHen I use the close and open function the left/right position does not work consistently. Sometimes moving to the...
  8. Repair & Technical Discussion
    Hello, I'm a proud new owner of a Case 1816B. I am having issues with the hydraulic breather and lots of fluid coming out of it. The local Case dealer suggested cleaning the filter or replacing. ( I thought improper fill level or air leak somewhere but they seemed sure of themselves) But did not...
  9. Repair & Technical Discussion
    Hi everybody! I have a question: on a 1953 Ford jubilee, when the three-point hitch piston is overextended, how do you fix it? It is stuck in the up position, how do you get the piston back in? Thanks for any input! Claudia
  10. Ford / New Holland
    The 3 point hitch won’t work, the fluid is just returning to reservoir without building Pressure. What could cause the hydraulic valve control to not function.
  11. Repair & Technical Discussion
    Hi guys I have a Case mxu100 pro never had a problem with it so far. It generally stays 1hr drive a way from home yesterday I drove it home for its annual bath time and oil change it drove fine until about half way I could feel just the slightest pressure in the steering wheel I got out and...
  12. John Deere
    Hey guys I was looking for some guidance on a new tractor that we’ve bought, which is a John Deere 1070. The tractor is great for what we need with the exception that I don’t have rear remotes. I’d like to add a set of rear remotes ideally two circuits so that I can run seed drills, log...
  13. Repair & Technical Discussion
    Does anybody know what these 2 screws are for on the bottom of my loader control valve? I have a leak and I've replaced the O-rings where I thought it was coming from on the relief valve and another connection. I have yet to test it as I am changing the fluid. Anyways, the small Allen head screw...
  14. Repair & Technical Discussion
    Hey all, I got my first little farm tractor (Ford 600) to start a hobby farm. I consider myself technical, but I’ve got a stumper. The tractor has an aftermarket loader on it. When I got the tractor, the hydraulic lines were rotted out so I had NAPA make me new lines. When I first connected...
  15. Repair & Technical Discussion
    Hey everyone, I have an issue I am hoping to get help with, I was driving my tractor Massey Ferguson 1525, hauling some mulch yesterday afternoon, when I was alerted that Hydraulic Fluid was spraying out of the bottom. I looked and it is coming from the front bucket controller. I have attached...
  16. Projects
    Hi All; New to the forum and technically a first time tractor owner. I grew up ranching near Walden Co, drilled oil, worked construction and currently farm so I’ve lost count of how many hours I’ve logged in different seats. I picked up a Ford 3400 this weekend for $4500. Even with the...
  17. Repair & Technical Discussion
    I am considering purchasing one of these tractors, but it has some issues and I wanted to get an idea of how serious and expensive these would be to repair. Hydraulics - it appears that behind the hydraulic oil filter there is a leak that goes into the transmission housing. Current owner...
  18. Ford / New Holland
    Hello. I bought a second hand Ford 4600. I'm planning to mount a full hydraulic front loader. When i sit in the seat between my legs I have a 2 way manual activated valve. One position for the rear 3 point hydraulics and one position for a outlet same place as the valve. Is it from this outlet...
  19. Repair & Technical Discussion
    2007year Montana 4540 Please forgive my limited familiarity with lingo. I want to know the expected source of input for the loader controller. Loader looks factory - Loader and Tractor paint and manuals clearly match. (Color, size, paper, font, poor English, etc.) Yet, loader mount was...
  20. Repair & Technical Discussion
    Hi everybody. I was wondering if anyone could tell me what this part is called, (marked with an arrow in the picture) as I'm going to replace the sealings around it, but I cannot even order the right parts. Any help will be appreciated. Philip
1-20 of 63 Results
Top