Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Ford / New Holland
    I have a Ford 1700 tractor with a Ford 770 front end loader. The hydraulics were working fine and after running the tractor 8 hours tilling a field and moving dirt with the bucket the hydraulics became jerky and jumpy. If the tractor were to sit and cool down the hydraulics are smooth for the...
  2. Repair & Technical Discussion
    Tractor slips in 3&4 in both turtle & rabbit Seems to run in 1&2 Was wondering if hydraulic pressure could cause this if filter was clogged or a bad relay There is a relay for 1&2 and another for 3&4 Any suggestions on what to look for
  3. Repair & Technical Discussion
    Have a massey ferguson 1552 dyno It is slipping in 3 & 4 ,on turtle or rabbit Lower gears 1 & 2 seem to work. Clutch plate seems to engage. I was wondering if hydraulic pressure could be causing this or bad relay I believe there is a relay for 1&2 and another for 3&4. Anybody have any suggestions
1-3 of 3 Results