Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 23 Results
  1. Repair & Technical Discussion
    Hi I have a mf35 1959 4 cyl diesel and I wanted to know if it was possible to fit a diff lock? Also if it is possible, what parts would I need? I am quite practical and have rebuilt the engine on this mf35 but before I tear the rear ended to bits I wondered if anyone else had done a similar...
  2. Petroleum, Oils, Lubricants, Additives, Chemicals
    I have a 1943 Allis Chalmers model C and the manual calls for a sae 20W in the transmission and I was wondering if I could use a sae 20 instead ? And could I use it for the gear box as well ? I don't really know what to do here and I don't want to mess anything up , I bought it with my dad and...
  3. Repair & Technical Discussion
    Hello, I'm a proud new owner of a Case 1816B. I am having issues with the hydraulic breather and lots of fluid coming out of it. The local Case dealer suggested cleaning the filter or replacing. ( I thought improper fill level or air leak somewhere but they seemed sure of themselves) But did not...
  4. Classifieds
    Looking for 3 of these EXACT gas tank gauges below in my screenshot from my phone. I need one for my newest 6 horsepower Craftsman, one for my 10 horsepower Craftsman, and one for my stepdads Craftsman. I found ones that look like this on Ebay BUT not exactly like this. If someone has one or...
  5. Repair & Technical Discussion
    Hi All! I am on 1 1/2 acres of uneven terrain. I currently have an old Craftsman GT5000 Tractor that has been neglected/weathered/etc. The mower deck is probably all rusted/seized, etc from being left out in the elements. Can't get the tractor started, possibly the starter or ignition switch...
  6. Case / Farmall - International Harvester
    Was sold a tractor as 1964 IH 504 utility, but after doing many repairs trying to use the manual book I was given, realize it is NOT a 504. Maybe a 444 or 424? The oil filter sits on top of the plate, not underneath like most of the tractor pictures I have seen. The ID plate gives me no...
  7. Repair & Technical Discussion
    Bought the skid steer had to repower I’d did run and move just fine then it had a fire and burned up the new engine and the hydraulic hoses. Put another new engine in it. Now the LH side when the stick is pushed forward is goes in reverse. Before you say it yes I swapped the hoses to make sure...
  8. Repair & Technical Discussion
    Hi All, I am in a dilemma and could use some advice on what to do. I am fixing up the paint on my electric start Craftsman power unit because it did not meet my standards. I want the stuff I am painting to color match or very closely color match the rest of the tractor, and with that said I...
  9. Repair & Technical Discussion
    Hello and thanks for reading my post I have a satoh tractor that needs a new fuel Injection pump and I found one that looks identical but the numbers are a little different I was wondering if it will work as a replacement mine is (MD-PFR4M55/1ND152) k4A 12A-11 094500-1520 the replacement...
  10. John Deere
    I bought a new battery, and it sends electricity to my mower as its lights turn on. Also i hear an attempt of the engine to turn over, when i turn the key all the way, but it ultimately fails after 1 sec. Also, my mower makes a loud whining/squeal sound when it attempts to turn over the engine...
  11. Case / Farmall - International Harvester
    i have a question on my restoration project. where can you find more parts other than eBay and stieners. Case 830 dual range 1962 any help or tips would greatly be appreciated thankyou
  12. Repair & Technical Discussion
    Hey. I have a David Brown 990 Selectematic 1972 mod. I was changing the kill lever on the diesel pump. and I had to pull out the rod that ran from the pump to the cabin and now when I pull on the throttle it won't go back. Any tips to fix this?
  13. Repair & Technical Discussion
    This post has moved to the Bolens category
  14. Repair & Technical Discussion
    This is embarrasing. I have an elecritically dead tractor. I have been told to check the fuses, etc. Found the main 40 amp fuse, it is good. Where is the fuse block and how do you access it? Thanks in advance. No good deed goes unpunished. /s/ Tom Milam, Jr.
  15. Repair & Technical Discussion
    I'm wondering if anyone has had the same issues as me and how they fixed. My case IH 4210 xl cab recently started having gauge problems. It has the digital dash. All of the gauges light up but the information is all wrong. Like it shows the fuel tank completely full, the water temp maxed...
  16. Repair & Technical Discussion
    I have a gas IH 464. The fuel pump was leaking and I replaced it. I have the lines correct, I have fuel to the pump but when I turn it over it does not pump fuel. Sent for a replacement pump and same issue. Fuel bowl on carb is dry and fuel filter is empty. Any ideas? I am flat out stumped.
  17. Repair & Technical Discussion
    Hi everyone. i have a Massey Ferguson 2640 tractor and the brakes currently dont work . if you pump the pedal three times the brakes are there . and if hold your foot on once you've pumped them up it stays there, it does not sink to the floor over a period of time . however after you have...
  18. Small Engines
    Ok ... so i got a Honda 125cc cdi atv motor in my tractor .... seperately i got a Honda 389cc OHV on my tiller( i pulled it out of a old 6500w generator and got it going ...) I know the atv motor has a dynamo for recharging the battery ...working the cdi etc ... but now i wanna hook up the...
  19. Repair & Technical Discussion
    My New Holland LS180 has gotten a new battery a month ago. When the key is inserted into the switch, the lights turn on. But when the key is turned to the on position it won't show lights on the dash. Here is a video of me explaining my issue.
1-20 of 23 Results
Top