Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Repair & Technical Discussion
    Hi I have a 1961 standard dexta that seems very low on power, it is slow to rev up and seems especially lacking in power when on inclines, I don't use it to pull anything but even still it's barely has the power to make it up even fairly gradual hills in top gear. It almost seems like it isn't...
  2. Operating & General Discussion
    Hello i'm new to the forum and have a question about a tractor that says fordson super major on the hood. been searching for info on it? anything would be a great help for me and my dad.
  3. Repair & Technical Discussion
    Hi guys, My 1959 fordson is having an issue with Auxiliary service control I have no flow, but the 3 point hitch is working as it should. Any advice? Thanks, Justin R
  4. Projects
    Good eveing all , I have a supermajor im currently stripping the engine down for a rebuild , the engine block is red oxide primer with grey on the top , the oil filter housing matches this also but everything elce bolted onto the block is blue / red oxide ? Never seen a super major engine...
  5. Tractor Photos
    Last month I bought a 1958 Fordson Dexta. It's in pretty good shape overall. I had to replace the wiring loom because some wires were in pretty bad shape. This turned out to be a bit of a challenge as the diagram that came with the wires was inconclusive. The original 1958 diagram and some...
  6. Classifieds
    Hi. I have a 63 fordson super major that has a cracked front bolster. Is there anyone out there that has one they want to part with? Thank you.
  7. Classifieds
    We have two close friends (one died, one has Alzheimers) that we helping their families sell their antique tractors and flywheel engines. The equipment is selling on an online auction with Tays Auction in Cookeville, TN. You can find the auction at their website There is a...
  8. Attachments, Implements & Accessories
    Hey all, I'm new to the Forum, so let me briefly introduce myself. bought 5 acres about 12 months back and am building a house. House almost done and i thought i'd buy myself a tractor for slashing. Got myself a 59 Fordson power major and it runs like a dream! I need to buy a slasher for this...
  9. Repair & Technical Discussion
    Good Afternoon. Thank you for accepting me into the forum. I have a Bedford MJ truck with a 5.4l Turbo diesel engine. I want to put this into a Fordson Major. Can anyone tell me if it will go straight in or do I need a conversation plate. If so do you know where I can purchase. Many thanks
1-9 of 9 Results