Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. Repair & Technical Discussion
    I’m trying to find a list of all the oil/hydraulic/air filters ref# for my Case 75C. I’m also curious to know what brands that you have found to be suitable replacements (ie. Wix)? And where you have found to purchase reasonably? Thanks
  2. Ford / New Holland
    This tractor is new to me, it's got a bit over 2000 hours. As far as I can tell, no maintenance has been done on it in about 3 years. It's been used for brush clearance and other ranch related duties the entire time, weekly but not daily. Is it worth the money to get OEM filters, especially...
  3. Kubota
    If you look at my past post you'll see I've been fighting this for a long time. Basically the tractor starts sputtering then it dies. First time this happened I took off the gas tank cleaned out completely, used a pressure washer on the tank, changed out the fuel filters and it ran perfectly...
  4. Kubota
    I have changed fuel filters before but I don't remember if the filter fills completely with fuel or not? If it should be full why would this one not fill completely? A. bad filter? B. hole in filter? C. something else? D. Wont there be problems...
  5. Massey Harris-Ferguson
    I am trying to find a cabin filter for my 2020, 4707 from anyone other the MF due to their price being extreme. Does anyone know where I can find this part number? I have searched Amazon, eBay, Walmart and others. It is 11.5x11.5x2.5” 4385488m3 cabin filter
  6. Petroleum, Oils, Lubricants, Additives, Chemicals
    Good evening friends. I have a question that has been bugging the heck out of me for a couple of days. Time is due for my 50 hour service and nothing noted in the instruction manual regarding to what filter parts and even a cross reference option. I contacted branson directly by email, checked...
  7. Case / Farmall - International Harvester
    So I decided to drop the hydraulic filter cover and drain all the fluid on my Selectmatic Case 380ck (David Brown 885). I knew this was a problem some time ago and it may explain why my 3PH is moving so slowly. When I go to install the hydraulic filter on this tractor, the stem on the filter...
  8. Husqvarna
    Hi guys and gals, I got a Husqvarna Lgt2654 about 3years ago and untill now never had a problem with the Kholer command engine. At first it would die when i was mowing and it was hot, now it wont run with a load (mower engaged) on it. It will sit there and run at idle all day, but when I engage...
  9. Repair & Technical Discussion
    Hey guys, not sure if it's a common New Holland thing but I cant find anything out about it. I have a New Holland T7 190 with a power command transmissionand went to change the big filter inside of the plastic housing and there is a fair amount of metal filings sitting in the bottom of the...
  10. Yanmar
    Just when I needed my Yanny the most over the winter, the hydraulic system stopped up. 8-inches of snow and no ability to raise or lower the blade. Even worse, I would select a gear, and move the Power Shift. Sometimes it would engage and move. I had to park it because we got down to -48 in...
1-10 of 10 Results
Top