Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Repair & Technical Discussion
    Hi, new to the forum, and was looking for some guidance on an issue I ran into this weekend. I hooked up my discs to the tractor and loaded onto the trailer. All hydraulics (lifting) worked fine, then went to unload at the ranch and the lift arms would only lift the discs a couple inches and...
  2. Massey Harris-Ferguson
    Hi Lads and Lassies. I recently bought a massey 35 with a twist. Its been fitted with a suspected 1969 landrover engine.(parked a while and information was slack due to circumstances)Fast little yolk !! Need to get a frost plug, heating plugs and filter but don't know hon to even determine what...
  3. Full size Tractors
    Workshop Service Manual for Massey Ferguson and Ferguson MF & TO 35 50 Tractors
  4. Massey Harris-Ferguson
    Main Parts List Hydraulic Pump Drive Coupler, 708639M91, $70 Pump Drive Shaft Assembly, 707166M92, $135 19 GPM SAE-B 13 spline counter-clockwise rotation Hydraulic Pump, HGP AL13S-B02-220L, $172 Hydraulic Filter Assembly, 1042326M1, $34 Various hydraulic fittings, adapters, and hoses We...
  5. Repair & Technical Discussion
    Our Massey Ferguson 165 tractor's fuel gauge has never worked. The fuel gauge was bad but I was able to order a new one (p/n: 1074336M9) for $20 here...
  6. Projects
    Well, as the titel says I’m having problems with the ignition on my Massey Ferguson 350 or MF35, I cannot get any spark from the distributor or ignition coil. I have tried to just connect the coil to the battery and open the breakerpoints by hand, still nothing, then I put the spark plug...
  7. Massey Harris-Ferguson
    Hi there. I recently bought a 135 that was restored and it's going like a clock There's only one thing I have an issue with When driving it the the tractor does not drive off until the clutch is just released at the end In first gear the whole tractor shakes for some reason It makes it very...
  8. Repair & Technical Discussion
    I just got a new transmission dipstick for my tractor. The handle broke off the old one. The problem is the old one is 6 3/8" long and the new one is just 4 3/4" long. Can anyone tell me the right length?
1-9 of 9 Results
Top