Tractor Forum banner
drive belt
1-6 of 6 Results
  1. Repair & Technical Discussion
    Hi, I hit a huge rock in my yard with my new/20 year old craftsman hydro 1999. Shredded mandrel bottoms (star male into blades) Put new mandrels (3 bolt pattern) - then noticed checked drive (upper) belt Changed upper belt to same size, but not OEM Kevlar belt Blade drive belt pulley's (lower)...
  2. Bolens
    Info I was given and probably can't get any more info other than this....we are dealing with an old 3212H 120ST Bolens. Drive belt has been changed out and it runs again. Problem is now apparently drive is reverse and reverse is drive, please tell me it's an easy fix?
  3. Troy-Bilt
    Hi all, I have a 1979-ish tiller that I am trying to order some parts for. The serial number is clear as it is stamped into the transmission case (#322279). I have read that the model number is on tag "away from moving parts" . The lettering on the tag seems to be worn off. Q:Can anyone help...
  4. Simplicity
    Hi all, I have a 2003 Conquest that I bought new and have been using the 2 stage blower for snow removal. Over the last couple years I’ve been having occasional issues with forward and reverse not wanting to engage when the blower’s sub-frame hitch is installed – no issues at all when no...
  5. Cub Cadet
    I'm trying to replace the drive belt on a used lt1022 I just acquired, I've never worked on a cub cadet and I'm having issues removing the PTO clutch, the bolt just spins the motor. Am I missing a step or lockout procedure?
  6. Troy-Bilt
    I've replaced the drive belt and the other short belt (I don't remember the name of it, under the battery) Anyways... I'm sure 100% that I installed the belt the same way as the old one, however, when I move from neutral to forward/reverse, tractor will move slowly without even pressing the...
1-6 of 6 Results
Top