Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Repair & Technical Discussion
    Happy New to all! Been a few months since I last posted - been a bit busy. I have a Branson (BH86 Kukje) backhoe. I dropped a large log (not intentionally of course...) on to one of the fittings on the stabilizer. There looks to be a fitting that goes in to the hydraulic tube - the 90 degree...
  2. Petroleum, Oils, Lubricants, Additives, Chemicals
    Good evening friends. I have a question that has been bugging the heck out of me for a couple of days. Time is due for my 50 hour service and nothing noted in the instruction manual regarding to what filter parts and even a cross reference option. I contacted branson directly by email, checked...
  3. Repair & Technical Discussion
    I have a 2015 Branson 4720CH, was mowing and the PTO quit working. Fuse is good. Any ideas for troubleshooting the issue?
  4. Long / Farmtrac / Montana/ LS
    I had to replace my head gasket only to find the head cracked. Had it repaired put it all back together and now is very very hard to get it to run. Also replaced the glow plugs and fuel pump filters oil and antifreeze. It turns over great and spiders. After about 10 minutes it may stay running...
  5. Repair & Technical Discussion
    Hello Folks. I'm doing the 50 hour service on a new 4720h and have the filters and oil for the hydraulic system, the last thing on the list. Any secrets or tips I should consider? I've changed lots of oils in my day but never a hydraulic system. Hoping it's just a drain/filter replace and...
  6. Introductions
    New gentleman farmer, with new tractor and learning from all the real farmers around me. I have a 2017 Branson 4720H and love it at the 50 hour mark. I am challenged finding part numbers for any of the filters to cross reference at NAPA, but am going to make the 1.2 hour drive to the...
1-6 of 6 Results