Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 14 Results
  1. Ford / New Holland
    I found a leaking rear axle seal on my Dexta so purchased new brake shoes. I carefully chose a set listed as "Fits Dexta", but the parts I received from Tractor Parts ASAP did not have the proper mounting holes. The overall dimensions matched my original shoes, so I measured my originals to...
  2. Massey Harris-Ferguson
    Hi all love the forum! I have a Massey Ferguson 135 that is leaking oil from what i'd call the break arm bushing. coming out of the trumpet housing. the tractor has zero braking power and I'm wondering if this could be the reason. Any language regarding part names would be super helpful as well...
  3. 20220326_101442.jpg

    Replacing the inner seal for the brakes
  4. Case / Farmall - International Harvester
    Any one know what size and thread the brake pipe from the master cylinder is? I want to extend the pipe and be great to know what the thread size is , and cant find any reference to it in any parts list etc. many thanks
  5. Introductions
    Hi everyone, I have a 1950 Ferguson TO-20 I have no brakes! I have owned this tractor for several years. When I first got this tractor, it had brakes, but after a while they began to fail. I pulled it apart and found an excessive amount of Hyd fluid on the brakes. I pulled both axles out and...
  6. Operating & General Discussion
    I have a 1954 Super 77 Oliver. We use it explicitly for antique pulling. It is completely regular stock with zero modifications. Stock tires as well...never been replaced...still in good condition I'd say. For pulling we removed the Hydraulics and added brackets to the middle and rear and...
  7. Operating & General Discussion
    I currently own a Zetor 65 HP Diesel 4 x 4 which is known not to have the greatest brakes. The work I do is mostly on a steep driveway (17% Grade). The Zero manual strongly warns you not to change gears while on a grade. Of course, when I am doing road work like putting down gravel and grading I...
  8. John Deere
    Does anyone know the procedure for adjusting the brakes on a John Deere 3005?
  9. Repair & Technical Discussion
    Hi everyone. i have a Massey Ferguson 2640 tractor and the brakes currently dont work . if you pump the pedal three times the brakes are there . and if hold your foot on once you've pumped them up it stays there, it does not sink to the floor over a period of time . however after you have...
  10. Repair & Technical Discussion
    I need to get into the right brake of my 4505. Does anyone have advice? I have a diagram of the left side but cant find a blow-up of the right side.
  11. John Deere
    I just bought a JD 2555 because everyone said it was a good tractor and didn't have a computer. Tractor runs great so I am playing with it learning the controls. The loader can lift the front axle clear but cannot lift a bucket of dirt. I did notice the brake oil light flicker a couple times...
  12. Repair & Technical Discussion
    Hi all, I have an IH 574 and the brakes are killing me. The left brake is fine. The right is not. The right brake lost its pedal and I couldn't bleed it out. I thought the master cylinder was the culprit so I replaced it with a good used one. No good. I then replaced the equalizer valve. No...
  13. Case / Farmall - International Harvester
    Hello, I am a new member and new at trying to repair antique tractors. I am not new at auto mechanics however. I bought a running, though sorry looking, 58 JI Case 420B construction with backhoe and front end loader. My biggest frustration, no brakes at all. I have no adjustment to the...
  14. Case / Farmall - International Harvester
    I need to adjust the brakes on a 1965 Farmall 140. Can anyone tell me how or tell me where to find a service manual for this tractor.
1-14 of 14 Results
Top