Tractor Forum banner

3 point hitch

  1. Case / Farmall - International Harvester
    Has anyone here tried their hand at removing and cleaning the control valve for the 3-point on one of these? I am having the hardest time removing it and suspect a dirty valve is the culprit for why the hitch wont raise or lower. There are a few videos on YouTube of guys working on these but...
  2. Repair & Technical Discussion
    Hi - Am I the only one in the entire world that has had issues with the Shuttle Shift, Parking Brake, and front end on these tractors? I also cannot haul a bale of hay on my three point hitch without it falling off. Once lifted, the points point down and the bale falls of going up hills. Had...
  3. Case / Farmall - International Harvester
    Guys I have a case 380ck and the 3Point raises when I turn the tractor on but then doesn’t respond to the control arm to lower. I’m posting some pics here where I have removed the cover over top the control valve and the cover to expose the sensing cable linkage. Looks to me it’s dry as a bone...
  4. Classifieds
    I have two complete sears suburban 10s one tractor has a mower deck the other tractor has the 3 point hitch and a snow plow both have running engines and no problems with the transmission but they do need a little tlc please make offer I'm asking 600 for the pair
  5. Kubota
    I have just got my hands on a kubota L245 (4WD) and it has a problem with it`s 3 point hitch. It can support any weight and I would to fix it but I need the service manual. Is ther any way to get a pdf version of it?
  6. Repair & Technical Discussion
    I just bought my first tractor a Ford 3000 and when i move round rolls of hay im having a problem with the lift. It will lift 2 or 3 just fine but then it will just not lift at all. It does this each time. Works for a few lifts then quits. I have checked the fluid level and its good. Any...
  7. Case / Farmall - International Harvester
    Any help is appreciated. My 1586 has an issue with the 3 point hitch. Basically it has very little travel (up or down) just using the lift/lower control. I can only get it to move through full range by pulling draft control all the way to light to lift and all the way to heavy to lower. Don't...
Top