Living with an older tractor
  1. Graysonr
    LIVING WITH AN OLDER TRACTOR Can be both a challenge and rewarding. Especially if you are now in possession of a tractor purchased used from outside your immediate family, you have no chance of knowing it's significant maintenance history. Was it maintained by previous owners or did one or more previous owners do no maintenance and only fix only what was broken and preventing him using the tractor at the moment? Did it sit idle for long periods?

    Most of us buying an older tractor have to reconcile this purchase into their budget. This is true whether your goal is to restore the tractor or keep it as a working tractor. So in general, priorities have to be made.

    It is vital that as soon as possible after purchase, you go through all systems that make a tractor a tractor. Buy the owner's/operating manual (in the $20 range online) and I recommend referring to it before proceding.

    Here are some things I learned:

    Find a good mechanic who will give fair value for his labor and knowledge
    Learn when to call the mechanic
    The charging circuit must be capable of fully charging the battery
    The battery must take and hold a full charge
    The ignition circuit must function properly
    Fuel and air filters in place and in good condition
    No fuel or oil leaks
    Carburetor or diesel injection system must work properly
    Fluids / Lubrication:
    Grease all Zerk fittings
    Radiator at the proper level and indicate that it has antifreeze to the prudent temperature
    Engine oil change it and the filter after running the engine long enough to warm up.
    Steering Housing full as per owner's manual
    Power steering if equiped full as per manual*
    Transmission if clear, full as per manual. If milky, change and fill as per manual*
    Hydraulics/Rear Axle if clear, full as per manual. If milky, change and fill as per
    *Some of us buy “fallen flag” tractor brands, and in this I include Ford as a “fallen flag” as their specifications for fluids are now pretty meaningless. Some parts places such as Tractor Supply and NAPA sell “universal tractor fluid” and this is fine in the power steering, transmission, and hydraulics/rear axle
    Brakes test as per manual and adjust as necessary.
    Tires/Wheels/Rims No rust at the valve stems. Bite the bullet and get rid of the
    rags. Odds are the new ones will last you a lifetime.

    There are few things as discouraging as a tractor that won't run, won't lift, has a flat tire. So do your maintenance and leave that for the guy down the road. Be generous and give him a tow.....but do not loan him your tractor or tools!

    If you have a gasoline tractor, don't count on much expertise at your local tractor dealer. Most mechanics in those shops have no idea how a carburetor works......they were trained for diesel.

    Especially if you are now the proud owner of an older tractor, PLEASE throw away the adjustable wrench and vise grips....while you're at it promise not to use 12 pt sockets or box end wrenches. Please stick with 6 point sockets, end wrenches, and 8 point sockets for square fittings. While I detest impact wrenches, lets face it, that's what built your tractor and it's what the mechanic used 33 years ago to put that bolt in! You may have to resort to one to break loose 5 layers of paint and 33 years of rust. But try cutting away the paint from the nut and giving it a few hours with penetrating oil before breaking out the impact wrench.

    Why did the transmission or hydraulic/rear axle fluid go milky? Disuse. Period. How can I prevent it from happening again? Run/move/drive the tractor and use the hydraulics on a regular basis.

    Share This Article


To view comments, simply sign up and become a member!